How to replace the upper ball joint on 2006 GMC Envoy?

Before starting work lift the car and put it on stands while removing the tire and wheel. Start by untighting the Steering Knuckle joint that brings together the Wheel Hub and then disconnect both the upper Ball Joint retaining clip and boot. To remove the upper Ball Joint from the Steering Knuckle you need to use the lower Ball Joint remover and installer (J9519-E). The proper installation of the new upper Ball Joint into the Steering Knuckle depends on using the lower Ball Joint remover and installer (J9519-E), control arm bushing set (J21474-01), and Ball Joint installation spacer (J45117). Install the Steering Knuckle with Wheel Hub and replace the tire and wheel. Lower the vehicle and test front wheel alignment at the end.

OEM 2006 GMC Envoy Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

View related parts
2006 GMC Envoy Lower Ball Joint, Front Part Number: 19133670
$57.43 MSRP: $140.12
You Save: $82.69 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 22157319
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.9 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Upper Ball Joint, Front Part Number: 19133638
$85.35 MSRP: $146.59
You Save: $61.24 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints; Stud, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaces: 22157320
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.0 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19133638
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2006 GMC Envoy Ball Joint

With a comprehensive array of OEM 2006 GMC Envoy Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 GMC Envoy Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 GMC Envoy Ball Joint Parts and Q&A

Q: How to replace the upper ball joint on 2006 GMC Envoy?
A: Before starting work lift the car and put it on stands while removing the tire and wheel. Start by untighting the Steering Knuckle joint that brings together the Wheel Hub and then disconnect both the upper Ball Joint retaining clip and boot. To remove the upper Ball Joint from the Steering Knuckle you need to use the lower Ball Joint remover and installer (J9519-E). The proper installation of the new upper Ball Joint into the Steering Knuckle depends on using the lower Ball Joint remover and installer (J9519-E), control arm bushing set (J21474-01), and Ball Joint installation spacer (J45117). Install the Steering Knuckle with Wheel Hub and replace the tire and wheel. Lower the vehicle and test front wheel alignment at the end.