How to replace the Wheel Bearing, hub, and seal on a 4WD on 2006 GMC Envoy?

To replace the Wheel Hub, bearing, and seal for a 4wd vehicle, start by removing the center of the tire and wheel center cap, drive axle nut, etc. Lift the vehicle, then remove the tire and wheel as well as the brake rotor. Remove the wheel drive shaft from the Wheel Hub and Wheel Bearing by positioning a brass drift against the outer end of the wheel drive shaft where it protects the threads and deliver a sharp blow to it using a hammer and do not try to pull it out at this point. Next take out the ABS Sensor mounting bolt and ABS Sensor from the Wheel Hub and bearing. Unbolt the Wheel Hub and bearing from Steering Knuckle, and then remove the Wheel Hub and bearing out. Take off the splash shield on the Steering Knuckle. For installation, attach first the splash shield to Steering Knuckle in alignment with the threaded holes. Then, mount the Wheel Hub and bearing to the Steering Knuckle aligning the threaded there and fasten it by using mounting bolts to tighten them to 105 nm (77 ft. Lbs.). Mount the ABS Sensor and its bolt using 18 nm (13 ft. Lbs.). Reinstall brake rotor, tire, and wheel, lower the vehicle, and lastly, reinstall the drive axle nut with a torque of 140 nm (103 ft. Lbs.), then the tire and wheel centre cap.

OEM 2006 GMC Envoy Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Bearings found

View related parts
2006 GMC Envoy Axle Bearings, Front Part Number: 26053326
$11.46 MSRP: $20.46
You Save: $9.00 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Bearing; Bearings; Bearing, Front Wheel Drive Axle Shaft
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 2.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26053326
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Wheel Bearing, Rear Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.4 x 3.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12479031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Hub & Bearing, Front Part Number: 19259798
$240.21 MSRP: $466.20
You Save: $225.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 12413037, 15130858
- Item Weight: 9.80 Pounds
- Item Dimensions: 7.0 x 6.6 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19259798
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Bearing, Front Part Number: 15884291
Product Specifications
- Other Name: Bearing Assembly-Front Wheel Drive Intermediate Shaft; Axle Bearing; Bearing, Front Axle
- Position: Front
- Replaces: 15030024, 15166774, 15200680
- Item Weight: 5.60 Pounds
- Item Dimensions: 11.2 x 10.8 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 GMC Envoy Bearing, Front Part Number: 15884292
Product Specifications
- Other Name: Bearing, Front Wheel Drive Intermediate Shaft; Axle Bearing; Bearing, Front Axle
- Position: Front
- Replaces: 15030023, 15200681, 15166773, 15054996
- Item Weight: 7.70 Pounds
- Item Dimensions: 11.3 x 10.4 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884292
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2006 GMC Envoy Wheel Bearing

With a comprehensive array of OEM 2006 GMC Envoy Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 GMC Envoy Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 GMC Envoy Wheel Bearing Parts and Q&A

Q: How to replace the Wheel Bearing, hub, and seal on a 4WD on 2006 GMC Envoy?
A: To replace the Wheel Hub, bearing, and seal for a 4wd vehicle, start by removing the center of the tire and wheel center cap, drive axle nut, etc. Lift the vehicle, then remove the tire and wheel as well as the brake rotor. Remove the wheel drive shaft from the Wheel Hub and Wheel Bearing by positioning a brass drift against the outer end of the wheel drive shaft where it protects the threads and deliver a sharp blow to it using a hammer and do not try to pull it out at this point. Next take out the ABS Sensor mounting bolt and ABS Sensor from the Wheel Hub and bearing. Unbolt the Wheel Hub and bearing from Steering Knuckle, and then remove the Wheel Hub and bearing out. Take off the splash shield on the Steering Knuckle. For installation, attach first the splash shield to Steering Knuckle in alignment with the threaded holes. Then, mount the Wheel Hub and bearing to the Steering Knuckle aligning the threaded there and fasten it by using mounting bolts to tighten them to 105 nm (77 ft. Lbs.). Mount the ABS Sensor and its bolt using 18 nm (13 ft. Lbs.). Reinstall brake rotor, tire, and wheel, lower the vehicle, and lastly, reinstall the drive axle nut with a torque of 140 nm (103 ft. Lbs.), then the tire and wheel centre cap.