OEM 2007 Buick Lucerne Exhaust Hanger

Exhaust Tail Pipe Hanger
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Hangers found

  • 2007 Buick Lucerne Exhaust Hanger Diagram - 25711980
    View related parts
    Product Specifications
    • Other Name: Hanger; Exhaust Bracket; Exhaust Hanger; Muffler & Pipe Bracket; Muffler & Pipe Hanger; Bracket; Bracket, Exhaust Muffler/Resonator
    • Position: Rear
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 7.1 x 3.2 x 3.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25711980
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Buick Lucerne Submodels:
    • CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
  • 2007 Buick Lucerne Exhaust Hanger Diagram - 25609451
    View related parts
    Product Specifications
    • Other Name: Insulator-Exhaust Pipe Hanger; Exhaust Insulator; Exhaust Hanger; Converter & Pipe Insulator; Muffler & Hanger; Insulator, Exhaust Muffler/Resonator; Insulator, Exhaust Pipe
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 5.4 x 3.4 x 1.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25609451
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Buick Lucerne Submodels:
    • CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
  • 2007 Buick Lucerne Exhaust Hanger Diagram - 25773925
    View related parts
    Product Specifications
    • Other Name: Insulator, Catalytic Converter; Exhaust Insulator; Exhaust Hanger; Muffler & Pipe Insulator; Insulator; Insulator, Exhaust Tail Pipe; Insulator, Exhaust Pipe
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 4.4 x 3.1 x 1.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25773925
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Buick Lucerne Submodels:
    • CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2007 Buick Lucerne Exhaust Hanger

With a comprehensive array of OEM 2007 Buick Lucerne Exhaust Hanger, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Lucerne Exhaust Hanger are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Lucerne Exhaust Hanger Parts and Q&A

  • Q: How to Service and Repair the Exhaust Hanger and System Insulator on 2007 Buick Lucerne?
    A: The first step in servicing and repairing the exhaust system insulator along with hanger and bracket requires you to raise and support the vehicle. The exhaust hanger connecting the rear suspension support bracket requires the removal of its bolt so you can apply a lubricant to the hanger rod for successful extraction. You should first pull on the exhaust hanger to disconnect it from the exhaust pipe hanger rod before removing its hanger bracket nut (a single exhaust system uses this method with dual exhaust requires similar steps). You can make the rear hanger rod easier to remove by applying lubricant then detach the rear exhaust hanger from the tail pipe hanger rod by pulling it outward. Begin installation by apply soapy solution to the back hanger rod and inner diameter of the rear exhaust hanger then press the hanger over the tail pipe rod before positioning onto the hanger bracket (single exhaust shown, dual exhaust similar). The rear exhaust hanger bracket requires installation by attaching it to hanger bracket nut before torquing the nut to 30 N.m (22 lb ft). Use a soapy solution to lubricate all needed surfaces of the exhaust pipe hanger rod and center exhaust hanger inner diameter. After that position exhaust hanger onto exhaust pipe hanger rod and fasten it to the rear suspension support bracket bolt with 30 N.m (22 lb ft) torque before lowering the vehicle.

Related 2007 Buick Lucerne Parts