How to replace the rear brake line on 2007 Buick Rainier?

Replacements of rear brake hoses begin by elevating the vehicle then disconnecting the tire and wheel assembly. Remove any foreign matter and dirt buildup from the brake hose and brake pipe fittings. Insert rubber plugs or caps on the brake pipe fitting outlets to stop fluid leakage and contamination during brake hose removal by using a back up wrench. Next use a wrench to remove the Brake Line's bolt from the frame and the brake hose bolt from the caliper while carefully extracting any adhered metal gaskets found at both ends. Throw the copper gaskets out because you must never reutilize them. New copper gaskets must go onto the rear Brake Caliper Bolt for installation. Secure the rear brake hose to its corresponding place on the rear brake caliper by tightening the bolt to 44 n.m (23 lb ft). Proceed by removing the rubber plug or cap from the rear brake pipe fitting before attaching the brake pipe to the brake hose and torquing the rear brake pipe fitting to 20 n.m (18 lb ft) using a back up wrench. Mount the brake pipe retaining bolt on the frame before screwing it tight to 20 n.m (18 lb ft). The hydraulic brake system must be bleed before installing the tire and wheel assembly then lowering the vehicle to its position.

OEM 2007 Buick Rainier Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2007 Buick Rainier Flex Hose, Front Driver Side
Part Number: 19366690
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15877295, 19331544, 25844098
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.2 x 24.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366690
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick Rainier Flex Hose, Front Passenger Side
Part Number: 19366746
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 10372504, 15070808, 15112267, 15786537
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.2 x 26.0 x 2.0 inches
- Condition: New
- SKU: 19366746
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick Rainier Flex Hose, Front Driver Side
Part Number: 15786538
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 10372505, 15070807, 15112268
- Item Weight: 1.00 Pounds
- Item Dimensions: 25.3 x 3.4 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15786538
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick Rainier Flex Hose, Front Passenger Side
Part Number: 19366691
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15877294, 19331545, 25844099
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 25.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366691
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick Rainier Flex Hose, Rear
Part Number: 19366689
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15877297, 10372502, 15134755
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.0 x 14.7 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366689
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2007 Buick Rainier Brake Line

With a comprehensive array of OEM 2007 Buick Rainier Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rainier Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rainier Parts Questions & Experts Answers

Q: How to replace the rear brake line on 2007 Buick Rainier?
A: Replacements of rear brake hoses begin by elevating the vehicle then disconnecting the tire and wheel assembly. Remove any foreign matter and dirt buildup from the brake hose and brake pipe fittings. Insert rubber plugs or caps on the brake pipe fitting outlets to stop fluid leakage and contamination during brake hose removal by using a back up wrench. Next use a wrench to remove the Brake Line's bolt from the frame and the brake hose bolt from the caliper while carefully extracting any adhered metal gaskets found at both ends. Throw the copper gaskets out because you must never reutilize them. New copper gaskets must go onto the rear Brake Caliper Bolt for installation. Secure the rear brake hose to its corresponding place on the rear brake caliper by tightening the bolt to 44 n.m (23 lb ft). Proceed by removing the rubber plug or cap from the rear brake pipe fitting before attaching the brake pipe to the brake hose and torquing the rear brake pipe fitting to 20 n.m (18 lb ft) using a back up wrench. Mount the brake pipe retaining bolt on the frame before screwing it tight to 20 n.m (18 lb ft). The hydraulic brake system must be bleed before installing the tire and wheel assembly then lowering the vehicle to its position.