Make sure this part fits

GM 19366690
Flex Hose, Front Driver Side

2006-2009 GM

Customer Questions & Expert Answers (10)
GM 19366690 Flex Hose, Front Driver Side
GM 19366690 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    15877295, 19331544, 25844098
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19366690
    Part DescriptionHose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
    Other NamesHose, Hydraulic Brake
    Item Dimensions3.2 x 24.5 x 2.1 inches
    Item Weight1.30 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15877295, 19331544, 25844098
    ManufacturerGeneral Motors
    SKU19366690
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Buick RainierCXL6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2006-2009 Chevrolet TrailblazerBase, LS, LT, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2006 Chevrolet Trailblazer EXTLS, LT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2006-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19366690 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366690 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the rear brake hose to the rear brake caliper for the 2006 Buick Rainier? Posted by Customer
    A:
    Remove the rubber plug or cap from the rear brake pipe fitting, install the brake pipe to the brake hose, and tighten the rear brake pipe fitting to 20 Nm (18 ft. lbs.) using a backup wrench.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is required for installation of the new brake hose for the 2006 Buick Rainier? Posted by Customer
    A:
    Use only new copper gaskets, installing them to the brake hose and bolt before securing the brake hose bolt to the brake caliper, tightening it to 44 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in the process for the 2007 Buick Rainier? Posted by Customer
    A:
    Bleed the hydraulic brake system, install the tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after raising for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after removing the brake hose retaining bolt for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the brake hose bolt from the brake caliper assembly and take out the brake hose from the vehicle, ensuring to remove any metal gaskets stuck to the brake caliper or brake hose end, and discard the copper gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake pipe to the brake hose for the 2009 GMC Envoy? Posted by Customer
    A:
    Tighten the brake pipe fitting to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is used to create the flare for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    The appropriate forming mandrel and the lever of the J 45405.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake pipe be connected to the brake hose for the 2007 GMC Envoy? Posted by Customer
    A:
    Connect the brake pipe to the brake hose, tightening the fitting to 20 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you attach the rear brake hose to the rear brake caliper for the 2008 GMC Envoy? Posted by Customer
    A:
    Attach it and tighten the rear brake bolt to 44 N.m (23 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19366690, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19366690 Flex Hose, Front Driver Side. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19366690 Flex Hose, Front Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery