Make sure this part fits

GM 15001400
Splash Shield, Driver Side

2002-2009 GM

Customer Questions & Expert Answers (7)
GM 15001400 Splash Shield, Driver Side
GM 15001400 Splash Shield, Driver Side
  • Part Description
    Shield, Brake Flange Plate; Brake Dust Shield
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$41.26 MSRP: $72.46
You Save: $31.20 (44%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face6 Cyl 4.2 L GAS
    2002-2009 GMC EnvoySLE, SLT6 Cyl 4.2 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15001400 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15001400 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake dust shields on Chevrolet Trailblazer? Posted by Customer
    A:
    First, lift the vehicle and the vehicle's tire and wheel assembly. Then remove the front hub and bearing assembly, the retaining bolts for brake dust shields, then brake dust shields. For installation, start by taking the new brake dust shields into the position and attaching it to the car using the retaining bolts that are to be tightened in line with the wheel hub and bearing. Finally, reinstall the front hub and bearing assembly, then use tire and wheel assembly before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front disc brake dust shields on GMC Envoy? Posted by Customer
    A:
    You must lift the vehicle to replace the front disc brake dust shields by taking off the wheel and tire first. Start by taking off the front hub and bearing parts before removing their retaining bolts from the brake dust shields. Then you can detach the brake dust shield unit. Mount the new brake dust shield onto the vehicle and fasten it using bolts. When tightening the bolts keep the wheel hub and bearing in mind to achieve proper installation. Position the tire wheel assembly then the front hub bearing assembly before putting the vehicle back down. Use proper brake dust protection while performing this task.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the new splash shield for the 2005 Buick Rainier? Posted by Customer
    A:
    Place the new splash shield in position and secure it with the retaining bolts, ensuring they are tightened similarly to the wheel hub and bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after removing the tire and wheel assembly for the 2005 Buick Rainier? Posted by Customer
    A:
    Detach the park brake cable from the rear brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the final step before lowering for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Reattach the park brake cable to the rear brake caliper, adjust the park brake shoe, and reinstall the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be removed after the park brake cable for the 2004 GMC Envoy? Posted by Customer
    A:
    Next, remove the wheel cylinder and the rear axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Splash Shield, Driver Side 15001400 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15001400 Splash Shield, Driver Side is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15001400 Splash Shield, Driver Side fits certain Chevrolet Trailblazer models, as well as GMC Envoy. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15001400 maintains top performance when functioning as the Shield, Brake Flange Plate; Brake Dust Shield unit at its Driver Side. The component 15001400 is constructed from durable material and its dimensions span 9.4 x 3.0 x 14.4 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Dust Shield. The part 15001400 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.