Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
2007 Cadillac CTS Door Latch Assembly
With a comprehensive array of OEM 2007 Cadillac CTS Door Latch Assembly, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac CTS Door Latch Assembly are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Cadillac CTS Parts Questions & Experts Answers
Q: How to replace the rear Door Latch Assembly on 2007 Cadillac CTS?
A: You need to remove the door trim panel first along with the door module and inside Door Handle to access the replacement of the rear door latch. You must remove the water deflector before disconnecting the outside Door Handle rod from the door latch by opening its clip. Remove the inside handle rod from the rod guide and put the inside lock rod grommet through the available space. Remove the door latch screws first before pulling out the door latch with its attached inside Door Handle rod and lock rod. Disconnect the electrical connector afterward and eliminate both components from the door latch. The installation process includes connecting the inside Door Handle rod and lock rod to the door latch before connecting the electrical connector. Next, place the door latch into the door with proper screw tightening to 10 n.m (89lb.in). To connect the outside Door Handle rod with the door latch just place the rod inside the clip before closing it. Start by inspecting the outside Door Handle before you complete the installation of the inside handle rod into its rod guide and finally add the water deflector and inside Door Handle followed by the door module and door trim panel.