OEM 2007 Cadillac DTS Rocker Shaft Spring Kit

Rocker Shaft Spring Set
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rocker Shaft Spring Kit found

  • 2007 Cadillac DTS Rocker Shaft Spring Kit - 12565199
    2007 Cadillac DTS Rocker Shaft Spring Kit Diagram - 12565199
    View related parts

    2007 Cadillac DTS Valve Springs

    Part Number: 12565199
    $1.77 MSRP: $2.78
    You Save: $1.01 (37%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Spring, Valve; Valve Spring; Spring, Engine Valve
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 2.2 x 1.6 x 1.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12565199
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Cadillac DTS Submodels:
    • Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2007 Cadillac DTS Rocker Shaft Spring Kit

With a comprehensive array of OEM 2007 Cadillac DTS Rocker Shaft Spring Kit, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac DTS Rocker Shaft Spring Kit are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac DTS Parts Questions & Experts Answers

  • Q: How to service and repair the Rocker Shaft Spring Kit and Valve Stem Oil Seal on 2007 Cadillac DTS?
    A: To fix the valve guide seal you need to take out the left camshafts then lift the vehicle in position. First remove the connecting brace between the Oil Pan and transaxle case then take out the torque converter cover. Position the flywheel holder (J 44214) before lowering the vehicle to service area. Before removing the Spark Plug work on cleaning its seat area to avoid dirt from entering the engine cylinder. Put the valve spring compressor base plate (J 44211) over the Spark Plug hole then insert Spark Plug port adapter (J 39313) while keeping the valve sealed with continuous air supply. Push the arm and swivel nut of the valve spring compressor j 44211 tool onto the valve stud in the appropriate position before tightening just until the valve locks become accessible for removal using a magnet. Turn the swivel nut until you can move the arm away from the valve to remove both the spring retainer and valve spring. The valve stem seal remover and installer (J 38820) device helps you grasp and take out the old valve stem seal for inspection before replacing the valve spring. Take clean engine oil and lubricate the valve stem along with the inside of the new seal. Install the new valve stem seal with the valve stem seal remover and installer (J 38820) while rotating it. Use the swivel nut on valve spring compressor j 44211 to very loosely hold the valve parts for position installation with on-vehicle valve retainer remover/installer j 43059. Reset the compressor by letting the air out through the swivel nut then take away the Spark Plug port adapter (J 39313) from its mount. Set the Spark Plug into position after removing the base plate of the valve spring compressor (J 44211). Put the process into action for other cylinders needing service before adding back the left Camshaft assembly. Lift the vehicle back up to work position then take out the flywheel holder while installing the torque converter cover followed by fitting and tightening the Oil Pan to transaxle brace at 50 n.m (37 lb ft) before lowering the vehicle.

Related 2007 Cadillac DTS Parts