OEM 2007 Cadillac Escalade Brake Booster

2007 Cadillac Escalade Brake Booster Parts Questions & Experts Answers

• Q: How to replace the hydraulic brake booster on 2007 Cadillac Escalade?

  A: You should start replacement of the hydraulic Brake Booster by activating the park brake and blocking the wheels before proceeding. Disengage the inlet hose and steering gear and return hoses from the booster assembly but prevent all pipe removal from the master cylinder. After disconnecting the master cylinder to hydraulic booster nuts you must place the master cylinder in the engine compartment. First detach the stop lamp switch then disconnect the booster from its bulkhead mounts before pulling both the booster assembly with its gasket out. Start installation with the gasket while positioning the booster assembly second. The 4 booster to bulkhead nuts require tightening to 33 n.m (24 lb ft) before installing the stop lamp switch. Plug in the Brake Booster to its master cylinder position and seal the connecting hoses including return hose and steering gear and inlet hoses by tightening their nuts to 33 n.m (24 lb ft). Close off the hydraulic booster system bleeding procedure then unfasten the park brake and open the wheels.