Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
Position: Driver Side
Replaces: 25890943, 25801595
Item Weight: 0.70 Pounds
Item Dimensions: 4.0 x 3.1 x 14.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25906097
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2007 Cadillac Escalade EXT Submodels:
Base, Luxury, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
2007 Cadillac Escalade EXT Brake Line
With a comprehensive array of OEM 2007 Cadillac Escalade EXT Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac Escalade EXT Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Cadillac Escalade EXT Parts Questions & Experts Answers
Q: How to replace the rear brake line (Frame to Rear Axle 2500 Series) on 2007 Cadillac Escalade EXT?
A: The first step to replace the rear brake hose (Frame to Rear Axle 2500 Series) is to raise and support the vehicle. Follow the hose cleaning process until you remove all debris from both pieces. A back up wrench should be used to detach the brake pipe fitting from the brake hose before inserting rubber plugs or caps to block fluid leakage that would contaminate brake system components. First disconnect the brake pipe from the brake hose before removing the mounting bracket bolts from the mounting bracket and brake pipe fittings from the brake hose. Reverse the brake hose bracket mounting bolt from the mounting bracket before you remove the brake hose and bracket assembly. Position the brake hose against the rear axle housing mounting bracket while avoiding any hose twisting allowing the bracket to stay loose before fitting brake pipe components into the hose. Install the brake hose bracket bolt . Next unscrew the plugs or caps from brake pipe fittings and manually tighten this brake pipe fitting into brake hose . An open-end wrench might be needed to secure the brake hose before tightening the brake hose mounting bolt up to 25 N.m (18 lb ft). Lastly secure the brake pipe fittings to a torque value of 25 N.m (18 lb ft). Secure the brake hose bracket onto the frame before installing its bolts at 25 N.m (18 lb ft) tighten torque. The next step involves fitting the brake pipe in the brake hose after tightening the fittings to 25 N.m (18 lb ft) and bleeding the brake system followed by lowering the vehicle.