How to replace the Power Steering Hose for the gear inlet and outlet on 2007 Chevrolet Colorado?

The first step to replace the power steering gear inlet and outlet hose demands that you place a drain pan beneath the vehicle. The Power Steering Hose assembly must disconnect from the Power Steering Pump before raising the vehicle using suitable safety stands. Start by detaching the bolts that stabilize the Power Steering Hose assembly bracket then proceed to remove the mounting bolt connecting the hose assembly to the power steering gear. Remove the Power Steering Hose assembly from the power steering gear after disconnecting it from the power steering gear outlet and remove it from the vehicle. Each power steering gear inlet and outlet port requires complete debris removal before continuing to work on the power steering system components. Use power steering gear oil seal remover/installer (J 44586) to replace oil seals of the power steering gear provided a replacement is required. The inlet and outlet ports need another cleaning before applying the new oil seals through the same tool (J 44586). Put back the power steering gear while connecting the Power Steering Hose assembly to the power steering gear bolt before securing it to 12 n.m torque (106 lb in. Level). Then install Power Steering Hose assembly clip retaining bolts before tightening them to 9 n.m (79 lb in). Vehicle position should be lowered before connecting the Power Steering Hose assembly to the Power Steering Pump with a torque of 25 n.m (18 lb ft). Drain the pan and complete the Power Steering Pump reservoir with the proper fluid amount followed by a power steering system bleeding procedure.

OEM 2007 Chevrolet Colorado Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Power Steering Hoses found

View related parts
2007 Chevrolet Colorado Power Steering Pressure Hose
Part Number: 20934195
Product Specifications
- Other Name: Hose, Hydraulic Steering Gear Pressure; Power Steering Hose; Hose & Tube Assembly
- Item Weight: 2.30 Pounds
- Item Dimensions: 27.7 x 10.7 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20934195
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
2007 Chevrolet Colorado Power Steering Pressure Hose
Part Number: 20934197
Product Specifications
- Other Name: Hose, Hydraulic Steering Gear Pressure; Power Steering Hose; Hose & Tube Assembly
- Item Weight: 0.90 Pounds
- Item Dimensions: 21.4 x 15.6 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20934197
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS
View related parts
2007 Chevrolet Colorado Pipe, Passenger Side
Part Number: 19133632
Product Specifications
- Other Name: Pipe, Hydraulic Steering Gear Pressure; Power Steering Hose
- Position: Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 11.1 x 2.7 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133632
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Pipe, Driver Side
Part Number: 19133627
Product Specifications
- Other Name: Pipe, Hydraulic Steering Gear Pressure; Power Steering Hose
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 18.2 x 3.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Pipe, Passenger Side
Part Number: 19133628
Product Specifications
- Other Name: Pipe, Hydraulic Steering Gear Pressure; Power Steering Hose
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 11.9 x 2.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133628
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Power Steering Pressure Hose
Part Number: 20934196
Product Specifications
- Other Name: Hose, Hydraulic Steering Gear Pressure; Power Steering Hose; Hose & Tube Assembly
- Replaces: 15849435, 25833643
- Item Weight: 2.90 Pounds
- Item Dimensions: 29.1 x 10.8 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20934196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2007 Chevrolet Colorado Power Steering Pressure Hose
Part Number: 20934198
Product Specifications
- Other Name: Hose, Hydraulic Steering Gear Pressure; Power Steering Hose; Hose & Tube Assembly
- Item Weight: 2.10 Pounds
- Item Dimensions: 41.5 x 4.2 x 16.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20934198
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS
View related parts
2007 Chevrolet Colorado Pipe, Driver Side
Part Number: 19133631
Product Specifications
- Other Name: Pipe, Hydraulic Steering Gear Pressure; Power Steering Hose
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 18.5 x 4.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2007 Chevrolet Colorado Power Steering Hose

With a comprehensive array of OEM 2007 Chevrolet Colorado Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Colorado Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Colorado Power Steering Hose Parts Questions & Experts Answers

Q: How to replace the Power Steering Hose for the gear inlet and outlet on 2007 Chevrolet Colorado?
A: The first step to replace the power steering gear inlet and outlet hose demands that you place a drain pan beneath the vehicle. The Power Steering Hose assembly must disconnect from the Power Steering Pump before raising the vehicle using suitable safety stands. Start by detaching the bolts that stabilize the Power Steering Hose assembly bracket then proceed to remove the mounting bolt connecting the hose assembly to the power steering gear. Remove the Power Steering Hose assembly from the power steering gear after disconnecting it from the power steering gear outlet and remove it from the vehicle. Each power steering gear inlet and outlet port requires complete debris removal before continuing to work on the power steering system components. Use power steering gear oil seal remover/installer (J 44586) to replace oil seals of the power steering gear provided a replacement is required. The inlet and outlet ports need another cleaning before applying the new oil seals through the same tool (J 44586). Put back the power steering gear while connecting the Power Steering Hose assembly to the power steering gear bolt before securing it to 12 n.m torque (106 lb in. Level). Then install Power Steering Hose assembly clip retaining bolts before tightening them to 9 n.m (79 lb in). Vehicle position should be lowered before connecting the Power Steering Hose assembly to the Power Steering Pump with a torque of 25 n.m (18 lb ft). Drain the pan and complete the Power Steering Pump reservoir with the proper fluid amount followed by a power steering system bleeding procedure.

Related 2007 Chevrolet Colorado Parts

Alternate Year Models

2006 Chevrolet Colorado Power Steering Hose 2008 Chevrolet Colorado Power Steering Hose