How to replace the secondary fuel level sensor on 2007 Chevrolet Equinox?

Before replacing the secondary Fuel Level Sensor customers must obtain a new Fuel Tank module seal because replacement occurs during every service of the tank module. Each Fuel Pump module contains one of two fuel level sender unit and float assemblies which cannot be exchanged with each other. The Fuel Tank must be removed first before moving to the Fuel Pump module removal. Disconnect the electric connector of the fuel level sender unit and float before sliding the level sensor out by releasing its retaining tabs. Drain the fuel from the sender unit and float by placing them on top of the Fuel Pump module and ensuring the production of a secure snap before reconnecting the electrical wires. The installation process ends by placing the Fuel Pump module back into the tank followed by reinstallation of the Fuel Tank.

OEM 2007 Chevrolet Equinox Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Level Sensors found

View related parts
2007 Chevrolet Equinox Fuel Pump, Passenger Side
Part Number: 19153667
Product Specifications
- Other Name: Module Kit, Fuel Tank Fuel Pump (W/O Fuel Level Sensor); Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Position: Passenger Side
- Replaces: 19152660
- Item Weight: 4.10 Pounds
- Item Dimensions: 25.8 x 19.2 x 19.6 inches
- Condition: New
- SKU: 19153667
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Chevrolet Equinox Level Sensor, Driver Side
Part Number: 15904475
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.3 x 10.2 x 3.3 inches
- Condition: New
- SKU: 15904475
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Chevrolet Equinox Level Sensor, Passenger Side
Part Number: 15904474
Product Specifications
- Other Name: Sensor Kit-Fuel Level; Fuel Level Sensor; Sensor Kit, Fuel Tank Meter/Pump; Sensor, Fuel Tank Meter/Pump
- Position: Passenger Side
- Replaces: 19150173
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.1 x 8.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15904474
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

2007 Chevrolet Equinox Fuel Level Sensor

With a comprehensive array of OEM 2007 Chevrolet Equinox Fuel Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Equinox Fuel Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Equinox Parts Questions & Experts Answers

Q: How to replace the secondary fuel level sensor on 2007 Chevrolet Equinox?
A: Before replacing the secondary Fuel Level Sensor customers must obtain a new Fuel Tank module seal because replacement occurs during every service of the tank module. Each Fuel Pump module contains one of two fuel level sender unit and float assemblies which cannot be exchanged with each other. The Fuel Tank must be removed first before moving to the Fuel Pump module removal. Disconnect the electric connector of the fuel level sender unit and float before sliding the level sensor out by releasing its retaining tabs. Drain the fuel from the sender unit and float by placing them on top of the Fuel Pump module and ensuring the production of a secure snap before reconnecting the electrical wires. The installation process ends by placing the Fuel Pump module back into the tank followed by reinstallation of the Fuel Tank.