OEM 2007 Chevrolet Equinox Rack And Pinion

Steering Rack And Pinion
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack And Pinion found

  • 2007 Chevy Equinox Rack And Pinion - 15896770
    2007 Chevy Equinox Rack And Pinion Diagram - 15896770
    View related parts

    2007 Chevrolet Equinox Steering Gear

    Part Number: 15896770
    $453.37 MSRP: $838.80
    You Save: $385.43 (46%)
    ADD TO CART
    Product Specifications
    • Other Name: Gear, Steering; Gear Assembly
    • Position: Inner Outer
    • Replaces: 25917902
    • Item Weight: 14.30 Pounds
    • Item Dimensions: 8.2 x 64.1 x 6.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15896770
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Chevrolet Equinox Submodels:
    • LS, LT, LTZ | 6 Cyl 3.4 L GAS

2007 Chevrolet Equinox Rack And Pinion

With a comprehensive array of OEM 2007 Chevrolet Equinox Rack And Pinion, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Equinox Rack And Pinion are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Equinox Parts Questions & Experts Answers

  • Q: How to Replace the Front Rack and Pinion on 2007 Chevrolet Equinox?
    A: Steering Wheel immobilization through strap usage prevents its movement before power steering Rack And Pinion replacement because Steering Column locking avoids sir system damage. Start by elevating the vehicle then support it while you take off the front wheels. For both outer tie rods to steering knuckles remove the nuts but discard them afterward while voiding pickle fork or wedge-type tools which could damage the seal or bushing. When using the j 24319-b (Steering Linkage and Tie Rod Puller) to detach the steering knuckles from tie rods hold the ball stud still to avoid turning. Use the rotated intermediate Steering Shaft to access the intermediate shaft pinch bolt before removing the intermediate to Rack And Pinion pinch bolt for disposal. Begin by detaching the intermediate shaft from the Rack And Pinion and completing stabilization link separation from the stabilizer bar. The right-hand side of the vehicle provides access as you pull out the Rack And Pinion by removing its mounting bolts from the cradle. The installation of the heat shield requires positioning the stabilizer bar in an upper position to ensure gear clearance before completing right-side Rack And Pinion installation. Position the gear mounting bushings within the cradle supports before manually starting both Rack And Pinion to cradle mounting bolts with a torque of 110 n.m (81 lb ft). Leverage a new pinch bolt to connect the Rack And Pinion to the intermediate shaft while tightening it to 34 n.m (25 lb ft) torque. While installing new nuts on the stabilizer links, use your hands to stop the ball stud from rotating. The knuckle Tie Rod connection requires a new nut installation which needs to be tightened to 25 n.m (18 lb ft) while reaching a 90-degree angle. Put on the front tires you've prepared followed by wheel installation then conduct a front wheel alignment check before lowering the vehicle.

Related 2007 Chevrolet Equinox Parts