How to replace the A/C Hose assembly (L61) on 2007 Chevrolet Malibu?

The replacement process of compressor hose assembly (L61) must start with refrigerant recovery. Twist the locking tabs from the compressor hose and suction line connector using two small screwdrivers until you can pull out both components from the suction line. After removing the o-rings discard them while also eliminating the compressor hose bracket bolt. Start by pulling the air cleaner intake duct from the assembly after which the vehicle should be lifted. The service technician must first remove the right front fender liner and the right radiator air deflector retainers before taking out the right radiator air deflector. First disconnect the liquid line compression bolt before liberating both the condenser and compressor hose nut. Unbutton the compressor hose from the compressor where it meets the rail clip leading to the removal of the compressor line. Keep all a/c components capped immediately to stop contamination. The installation continues after removing and replacing old sealing washers by uncapping all a/c components. After placing the compressor line the compressor hose must go to the rail clip and the compressor before tightening its hose nut to 20 n.m (15 lb ft). Attach the compressor hose to the condenser before using the liquid line and compressor hose bolt which must be tightened to 20 n.m (15 lb ft). Reinstall the right front fender liner after putting the right radiator air deflector with its retainers into proper place. Lower the vehicle then connect the air cleaner intake duct to its corresponding assembly. The manufacturer provides new o-rings and processes are used to connect and fasten the compressor hose and suction line. Securing the compressor hose bracket bolt to 10 n.m presents the final step before evacuating the refrigerant system and charging it while implementing post-refill leak detection using the halogen leak detector (J 39400-A).

OEM 2007 Chevrolet Malibu A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Hoses found

View related parts
2007 Chevrolet Malibu Discharge Hose
Part Number: 20800919
$82.73 MSRP: $169.98
You Save: $87.25 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Suction Hose; Suction & Discharge Hose Assembly; Hose & Tube Assembly; Hose, A/C Compressor
- Replaces: 15820171
- Item Weight: 1.60 Pounds
- Item Dimensions: 34.7 x 15.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20800919
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Evaporator Tube
Part Number: 19257313
$125.34 MSRP: $224.82
You Save: $99.48 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Air Conditioner Refrigerant (All Metal); A/C Refrigerant Liquid Hose; A/C Hose; Suction & Discharge Hose Assembly; Tube, A/C Refrigerant (All Metal)
- Replaces: 15801579, 25814613, 15820166
- Item Weight: 1.10 Pounds
- Item Dimensions: 43.2 x 36.7 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19257313
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Classic LS, Classic LT, LS, LT, LTZ, Maxx SS, SS | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Suction & Discharge Hose Assembly
Part Number: 19244800
$73.76 MSRP: $131.72
You Save: $57.96 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly; Hose, A/C Compressor
- Replaces: 15801504, 15820169, 22715460
- Item Weight: 1.90 Pounds
- Item Dimensions: 38.7 x 12.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244800
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, LS, LT | 4 Cyl 2.2 L GAS
View related parts
2007 Chevrolet Malibu Suction Hose, Green Line
Part Number: 20916782
$70.34 MSRP: $127.32
You Save: $56.98 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, A/C Evaporator Thermal Expansion Valve; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Suction & Discharge Hose Assembly; Rear Suction Hose; Hose, A/C Refrigerant (Metal And Rubber Sections)
- Replaces: 15801580, 20800918, 22684662, 15820168
- Item Weight: 1.40 Pounds
- Item Dimensions: 25.4 x 13.9 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20916782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Suction Line
Part Number: 19244818
$46.59 MSRP: $86.94
You Save: $40.35 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose, Air Conditioner Refrigerant (Metal And Rubber Sections); A/C Refrigerant Liquid Hose; A/C Hose; Hose, A/C Refrigerant (Metal And Rubber Sections)
- Replaces: 15820167, 10366567, 15801386
- Item Weight: 1.50 Pounds
- Item Dimensions: 26.6 x 17.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244818
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Chevrolet Malibu Evaporator Tube
Part Number: 19244816
$135.92 MSRP: $243.80
You Save: $107.88 (45%)
Product Specifications
- Other Name: Tube, Air Conditioner Refrigerant (All Metal); A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Refrigerant (All Metal)
- Replaces: 15239827, 15820165, 22715450, 15801385, 25814612
- Item Weight: 1.20 Pounds
- Item Dimensions: 43.2 x 37.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244816
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2007 Chevrolet Malibu A/C Hose

With a comprehensive array of OEM 2007 Chevrolet Malibu A/C Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Malibu A/C Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the A/C Hose assembly (L61) on 2007 Chevrolet Malibu?
A: The replacement process of compressor hose assembly (L61) must start with refrigerant recovery. Twist the locking tabs from the compressor hose and suction line connector using two small screwdrivers until you can pull out both components from the suction line. After removing the o-rings discard them while also eliminating the compressor hose bracket bolt. Start by pulling the air cleaner intake duct from the assembly after which the vehicle should be lifted. The service technician must first remove the right front fender liner and the right radiator air deflector retainers before taking out the right radiator air deflector. First disconnect the liquid line compression bolt before liberating both the condenser and compressor hose nut. Unbutton the compressor hose from the compressor where it meets the rail clip leading to the removal of the compressor line. Keep all a/c components capped immediately to stop contamination. The installation continues after removing and replacing old sealing washers by uncapping all a/c components. After placing the compressor line the compressor hose must go to the rail clip and the compressor before tightening its hose nut to 20 n.m (15 lb ft). Attach the compressor hose to the condenser before using the liquid line and compressor hose bolt which must be tightened to 20 n.m (15 lb ft). Reinstall the right front fender liner after putting the right radiator air deflector with its retainers into proper place. Lower the vehicle then connect the air cleaner intake duct to its corresponding assembly. The manufacturer provides new o-rings and processes are used to connect and fasten the compressor hose and suction line. Securing the compressor hose bracket bolt to 10 n.m presents the final step before evacuating the refrigerant system and charging it while implementing post-refill leak detection using the halogen leak detector (J 39400-A).