OEM 2007 Chevrolet Malibu Washer Reservoir

2007 Chevrolet Malibu Parts Questions & Experts Answers

• Q: How to replace the windshield washer reservoir on 2007 Chevrolet Malibu?

  A: First you must open the hood and detach the solvent container hose from the washer hose to replace the windshield Washer Reservoir. Take out the washer solvent from the container while removing the liner from the front fender area. Take off the washer sensor electrical connector along with the Washer Pump electrical connector. Take out the washer solvent container from left frame rail by removing its nuts. Rephrase the following sentence. Transfer the Washer Pump assembly and washer level sensor together with seals as well as the old solvent container cap and hose to the fresh unit. Install the new washer solvent container on the left side frame rail then tighten all washer solvent container nuts to 10 n.m (89 lb in). Install the front fender liner back onto the car while connecting the Washer Pump and washer level sensor electrical wires. Add washer solvent to the container and attach its hose to the windshield washer line before checking washer functions.