How to replace the front drive shaft on 2007 Chevrolet Silverado 1500?

The process of front propeller shaft replacement begins by acquiring the clamp pliers - narrow jaw (J 43218) as one necessary tool. The reinstallation process requires accurate reference marking of all driveline components that relate to the propeller shaft and axles which includes propeller shafts and wheel drive shafts and pinion flanges as well as output shafts for proper reassembly alignment. You must elevate your vehicle and separate the Transfer Case clamp through natural tool opening of its exposed end with a flat-bladed tool. The technician should create reference points that show the alignment status between the propeller shaft and front axle pinion yoke. Protection of the injection joints requires not striking the yoke ears manually or inserting any tools between the yoke and Universal Joint. Detach all bolts and yoke retainers from the front axle pinion yoke and manage the bearing cap assemblies to prevent loss. The propeller shaft should be detached from the front axle pinion yoke before applying tape around each bearing cap to safeguard rollers from loss. Detach the propeller shaft by first removing its boot from the Transfer Case output shaft groove and moving the shaft forward to separate it. After securing each bearing cap with tape replace the boot. To proceed with the inspection remove any boot clamp from the propeller shaft boot along with the boot itself. Check the splines of the Transfer Case output shaft for appropriate lubricant before applying grease, gm p/n 12345879 (Canadian P/N 10953511), or equivalent lubricant which meets gm specification 9985830. After booting and clamping the propeller shaft boot you should slide the propeller shaft into the Transfer Case output shaft using the splines. The propeller shaft requires reinstallation to the front axle pinion yoke while you align reference marks established when removing it. Install the yoke retainers followed by bolts and tighten yoke retainer bolts to 25 n.m (18 lb ft). At last fit the boot onto the Transfer Case output shaft until the groove receives it and use clamp pliers - narrow jaw (J 43218) to crimp both clamps before lowering the vehicle.

OEM 2007 Chevrolet Silverado 1500 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Drive Shafts found

View related parts
2007 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912697
$1216.48 MSRP: $1572.71
You Save: $356.23 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15794277
- Item Weight: 17.10 Pounds
- Item Dimensions: 80.4 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2007 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912702
$1598.35 MSRP: $2235.31
You Save: $636.96 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15791188, 15940304, 20877203
- Item Weight: 23.40 Pounds
- Item Dimensions: 94.4 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912702
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2007 Chevrolet Silverado 1500 Drive Shaft, Front Part Number: 84669663
$313.29 MSRP: $624.71
You Save: $311.42 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15182098, 84060396, 15090195, 15719954
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84669663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Drive Shaft Part Number: 15791187
$72.59 MSRP: $486.62
You Save: $414.03 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Item Weight: 18.20 Pounds
- Item Dimensions: 84.0 x 3.6 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15791187
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912712
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 25784251
- Item Weight: 21.20 Pounds
- Item Dimensions: 95.2 x 5.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912712
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT, XFE | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Silverado 1500 Drive Shaft Assembly Part Number: 15711948
Product Specifications
- Other Name: Shaft, Propeller; Driveshaft
- Item Dimensions: 71.5 x 3.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15711948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2007 Chevrolet Silverado 1500 Drive Shaft Part Number: 15286091
Product Specifications
- Other Name: Shaft Assembly-Front & Rear Propeller; Driveshaft; Shaft, Propeller
- Position: Front and Rear
- Item Weight: 42.80 Pounds
- Item Dimensions: 108.7 x 2.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15286091
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2007 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912708
Product Specifications
- Other Name: Shaft Assembly-Propeller; Slip Yoke; Shaft, Propeller
- Replaces: 15791185, 20877205
- Item Dimensions: 83.4 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912708
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2007 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912694
$445.81 MSRP: $704.62
You Save: $258.81 (37%)
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15794276, 15791190
- Item Weight: 17.70 Pounds
- Item Dimensions: 80.0 x 5.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912694
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2007 Chevrolet Silverado 1500 Drive Shaft

With a comprehensive array of OEM 2007 Chevrolet Silverado 1500 Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Silverado 1500 Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Silverado 1500 Drive Shaft Parts and Q&A

Q: How to replace the front drive shaft on 2007 Chevrolet Silverado 1500?
A: The process of front propeller shaft replacement begins by acquiring the clamp pliers - narrow jaw (J 43218) as one necessary tool. The reinstallation process requires accurate reference marking of all driveline components that relate to the propeller shaft and axles which includes propeller shafts and wheel drive shafts and pinion flanges as well as output shafts for proper reassembly alignment. You must elevate your vehicle and separate the Transfer Case clamp through natural tool opening of its exposed end with a flat-bladed tool. The technician should create reference points that show the alignment status between the propeller shaft and front axle pinion yoke. Protection of the injection joints requires not striking the yoke ears manually or inserting any tools between the yoke and Universal Joint. Detach all bolts and yoke retainers from the front axle pinion yoke and manage the bearing cap assemblies to prevent loss. The propeller shaft should be detached from the front axle pinion yoke before applying tape around each bearing cap to safeguard rollers from loss. Detach the propeller shaft by first removing its boot from the Transfer Case output shaft groove and moving the shaft forward to separate it. After securing each bearing cap with tape replace the boot. To proceed with the inspection remove any boot clamp from the propeller shaft boot along with the boot itself. Check the splines of the Transfer Case output shaft for appropriate lubricant before applying grease, gm p/n 12345879 (Canadian P/N 10953511), or equivalent lubricant which meets gm specification 9985830. After booting and clamping the propeller shaft boot you should slide the propeller shaft into the Transfer Case output shaft using the splines. The propeller shaft requires reinstallation to the front axle pinion yoke while you align reference marks established when removing it. Install the yoke retainers followed by bolts and tighten yoke retainer bolts to 25 n.m (18 lb ft). At last fit the boot onto the Transfer Case output shaft until the groove receives it and use clamp pliers - narrow jaw (J 43218) to crimp both clamps before lowering the vehicle.