Make sure this part fits

GM 15711948
Drive Shaft Assembly

2007-2013 GM

Customer Questions & Expert Answers (10)
GM 15711948 Drive Shaft Assembly
GM 15711948 Drive Shaft Assembly
  • Part Description
    Shaft, Propeller; Driveshaft
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15711948
    Part DescriptionShaft, Propeller; Driveshaft
    Item Dimensions71.5 x 3.8 x 3.6 inches
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15711948
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2013 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007-2013 GMC Sierra 1500Denali, Hybrid, SL, SLE, SLT, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15711948 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15711948 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installation for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be inspected on the transfer case output shaft for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Inspect the splines for adequate lubricant; if necessary, apply grease, GM P/N 12345879 (Canadian P/N 10953511), or an equivalent meeting GM Specification 9985830.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done with the yoke attached to the output shaft for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Mark the transmission or transfer case, output shaft flange, universal joint bearing cap, and propeller shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the procedure for reassembling the propeller shaft for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the propeller shaft boot and the boot clamp, then insert the propeller shaft splines into the transfer case output shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be aligned before installing the propeller shaft on the rear axle for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    The reference marks on the propeller shaft, universal bearing cap, pinion flange, and rear axle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should you mark before disconnecting the propeller shaft for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Mark the relationship of the propeller shaft to the front axle pinion yoke, ensuring not to pound on the yoke ears or use a tool between the yoke and universal joint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    Why is it important to mark the components for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    To ensure they are reassembled in the same relationship as removed, while adhering to published specifications and torque values.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after installing the center bearing support for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Tighten the bearing support nuts to 40 N.m (30 lb ft) and the yoke retainer bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    How do you detach the propeller shaft from the transfer case output shaft for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Remove the boot from the groove on the transfer case output shaft and slide the propeller shaft forward to detach it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15711948, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15711948 Drive Shaft Assembly. It is sometimes referred to as GM Drive Shaft. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15711948 Drive Shaft Assembly. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery