How to replace the front drive shaft on 2010 Chevrolet Silverado 1500?

Raising the car requires the first step before removing the clamp positioned at the Transfer Case through prying up this part with a flat-bladed tool. The propeller shaft's relationship with the front axle pinion yoke requires marking before applying force in any way on the yoke ears or utilizing tools between the components since this could break the universal joints of the injection points. Gently remove all bolts and retainers from the front axle pinion yoke while avoiding the loss of bearing cap assemblies. After disconnecting the propeller shaft from its front axle pinion yoke position you should blind tape the bearing caps to avoid socket bearing loss. The output shaft of the Transfer Case requires boot removal from its groove so the propeller shaft can be advanced forward for separation. The Transfer Case output shaft splines need to be inspected for proper lubrication before applying grease gm p/n 12345879 (Canadian P/N 10953511) or an equivalent material following gm specification 9985830. The boot must be installed followed by the boot clamp on the propeller shaft before inserting the splines of the shaft into the Transfer Case output shaft. Synchronize the propeller shaft reference marks made at removal time when reconnecting it to the front axle pinion yoke. Insert yoke retainers and fasten the retaining bolts based on 25 nm (18 lb ft). To complete the installation process lower the vehicle then use j 43218 tool to crimp both clamps onto the Transfer Case output shaft boot.

OEM 2010 Chevrolet Silverado 1500 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Drive Shafts found

View related parts
2010 Chevrolet Silverado 1500 Drive Shaft
Part Number: 20912697
$1075.64 MSRP: $1442.85
You Save: $367.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15794277
- Item Weight: 17.10 Pounds
- Item Dimensions: 80.4 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Drive Shaft
Part Number: 20912702
$1466.37 MSRP: $2050.74
You Save: $584.37 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15791188, 15940304, 20877203
- Item Weight: 23.40 Pounds
- Item Dimensions: 94.4 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912702
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Drive Shaft
Part Number: 20912712
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 25784251
- Item Weight: 21.20 Pounds
- Item Dimensions: 95.2 x 5.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912712
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT, XFE | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Silverado 1500 Drive Shaft Assembly
Part Number: 15711948
Product Specifications
- Other Name: Shaft, Propeller; Driveshaft
- Item Dimensions: 71.5 x 3.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15711948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Drive Shaft
Part Number: 20912699
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15855534
- Item Weight: 20.40 Pounds
- Item Dimensions: 83.1 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912699
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- LT, LTZ | 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Drive Shaft, Front
Part Number: 22845694
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15902927
- Item Weight: 15.70 Pounds
- Item Dimensions: 38.5 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22845694
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Drive Shaft
Part Number: 20912700
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15909603
- Item Dimensions: 93.2 x 5.3 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912700
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
2010 Chevrolet Silverado 1500 Drive Shaft
Part Number: 20912708
Product Specifications
- Other Name: Shaft Assembly-Propeller; Slip Yoke; Shaft, Propeller
- Replaces: 15791185, 20877205
- Item Dimensions: 83.4 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912708
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Drive Shaft
Part Number: 20912694
$445.81 MSRP: $704.62
You Save: $258.81 (37%)
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15794276, 15791190
- Item Weight: 17.70 Pounds
- Item Dimensions: 80.0 x 5.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912694
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2010 Chevrolet Silverado 1500 Drive Shaft

With a comprehensive array of OEM 2010 Chevrolet Silverado 1500 Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Silverado 1500 Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Silverado 1500 Parts Questions & Experts Answers

Q: How to replace the front drive shaft on 2010 Chevrolet Silverado 1500?
A: Raising the car requires the first step before removing the clamp positioned at the Transfer Case through prying up this part with a flat-bladed tool. The propeller shaft's relationship with the front axle pinion yoke requires marking before applying force in any way on the yoke ears or utilizing tools between the components since this could break the universal joints of the injection points. Gently remove all bolts and retainers from the front axle pinion yoke while avoiding the loss of bearing cap assemblies. After disconnecting the propeller shaft from its front axle pinion yoke position you should blind tape the bearing caps to avoid socket bearing loss. The output shaft of the Transfer Case requires boot removal from its groove so the propeller shaft can be advanced forward for separation. The Transfer Case output shaft splines need to be inspected for proper lubrication before applying grease gm p/n 12345879 (Canadian P/N 10953511) or an equivalent material following gm specification 9985830. The boot must be installed followed by the boot clamp on the propeller shaft before inserting the splines of the shaft into the Transfer Case output shaft. Synchronize the propeller shaft reference marks made at removal time when reconnecting it to the front axle pinion yoke. Insert yoke retainers and fasten the retaining bolts based on 25 nm (18 lb ft). To complete the installation process lower the vehicle then use j 43218 tool to crimp both clamps onto the Transfer Case output shaft boot.

Related 2010 Chevrolet Silverado 1500 Parts

Alternate Year Models

2009 Chevrolet Silverado 1500 Drive Shaft 2011 Chevrolet Silverado 1500 Drive Shaft