Make sure this part fits

GM 20912694
Drive Shaft

2007-2013 GM

Customer Questions & Expert Answers (10)
GM 20912694 Drive Shaft
  • Part Description
    Shaft Assembly-Propeller; Driveshaft
  • Replaces
    15794276, 15791190
  • Manufacturer
    General Motors
Make sure this part fits
$445.81 MSRP: $704.62
You Save: $258.81 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2013 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007-2013 GMC Sierra 1500Denali, Hybrid, SL, SLE, SLT, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20912694 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20912694 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the propeller shaft for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Wrap the bearing caps with tape to prevent loss of bearing rollers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after securing the bearing caps for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the boot from the groove on the transfer case output shaft and slide the propeller shaft forward to detach it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    When should the propeller shaft bolts be fully tightened for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    After the center bearing support bolts are installed and torqued to specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What components should be reference marked for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    The propeller shafts, drive axles, pinion flanges, and output shafts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the next step after inspecting the slip yoke for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Align the reference marks on the propeller shaft, slip yoke, universal bearing caps, and transmission or transfer case, then install the propeller shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    How do you reconnect the propeller shaft for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Reconnect the propeller shaft to the front axle pinion yoke, aligning the reference marks made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the next step after removing the yoke retainers for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Disconnect the propeller shaft from the front axle pinion yoke and wrap the bearing caps with tape to prevent loss of bearing rollers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done with the bolts and universal straps for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Remove them from the rear axle pinion yoke, taking care not to damage the yoke ears.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done if applicable to the front propeller shaft for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Remove the boot from the front propeller shaft stub shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Drive Shaft 20912694 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20912694 Drive Shaft is available in the market under the name GM Drive Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20912694 Drive Shaft fits certain Chevrolet Silverado 1500 models, as well as GMC Sierra 1500 models.
The original GM component designated by manufacturer part number 20912694 maintains top performance when functioning as the Shaft Assembly-Propeller; Driveshaft unit. The component 20912694 is constructed from durable material and its dimensions span 80.0 x 5.1 x 5.1 inches while weighing 17.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shaft, Propeller. The part 20912694 has available replacement options 15794276, 15791190. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.