ChevyParts
My Garage
My Account
Cart
OEM 2007 Chevrolet Silverado 3500 Classic Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Intake Manifolds found
2007 Chevrolet Silverado 3500 Classic Intake Manifold Part Number: 97363571
$90.50 MSRP: $141.75You Save: $51.25 (37%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Manifold, Engine Fuel Intake Manifold; Manifold
- Position: Lower Driver Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 32.4 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97363571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Chevrolet Silverado 3500 Classic Intake Manifold Part Number: 97363572
$87.21 MSRP: $136.61You Save: $49.40 (37%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Manifold, Engine Fuel Intake Manifold; Manifold
- Position: Lower Passenger Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 33.4 x 5.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97363572
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Chevrolet Silverado 3500 Classic Manifold Part Number: 97364407
Product Specifications- Other Name: Manifold, Engine Fuel Intake Manifold; Intake Manifold
- Position: Upper
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.7 x 6.0 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97364407
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Manifold, Engine Fuel Intake Manifold; Manifold
- Item Weight: 45.80 Pounds
- Item Dimensions: 31.3 x 16.6 x 16.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12581115
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Manifold, Engine Fuel Intake Manifold; Manifold
- Replaces: 89017363
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418186
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Chevrolet Silverado 3500 Classic Manifold Part Number: 97363568
Product Specifications- Other Name: Manifold, Engine Fuel Intake Manifold; Intake Manifold
- Position: Center
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.0 x 6.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97363568
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Manifold, Engine Fuel Intake Manifold; Manifold
- Position: Center
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.8 x 5.3 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97363569
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Chevrolet Silverado 3500 Classic Intake Manifold
With a comprehensive array of OEM 2007 Chevrolet Silverado 3500 Classic Intake Manifold, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Silverado 3500 Classic Intake Manifold are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Chevrolet Silverado 3500 Classic Intake Manifold Parts and Q&A
- Q: How to replace the intake manifold on 2007 Chevrolet Silverado 3500 Classic?A: If to replace the Intake Manifold, one must remove the Throttle Body and fuel injectors. The electrical connectors of the manifold absolute pressure (MAP) sensor and Knock Sensor should be disconnected, and then the Knock Sensor harness connector removed from the Intake Manifold and laid back. If the vehicle has vacuum assisted brakes, unbolt the vacuum brake booster hose from the back of the Intake Manifold and the positive crankcase ventilation (PCV) hose. Next, do an extraction of the MAP Sensor and the evaporative emission (EVAP) purge solenoid vent tube which is taken off the solenoid and vapor pipe. Remove the evap purge solenoid bolt, solenoid, and isolator from the Intake Manifold, and then loosen and remove the Intake Manifold with the gaskets. The old gaskets should be discarded. If necessary, clean and check the Intake Manifold. For installation, install new Intake Manifold gaskets on the Intake Manifold, then install the manifold. While on the head, apply a 5 mm thick band of threadlocker to the bolt threads of the Intake Manifold bolts and tighten in the same sequence to 5 nm (44 inch lbs.) for the first and a final pass to 10 nm (89 inch lbs.). Mount the evap purge solenoid , isolator as well as bolt the isolator to the Intake Manifold using a bolt tightened to 10nm (89 inch lbs). Replace the evap purge solenoid vent tube attached back to the solenoid and vapor pipe. Lightly oil the MAP Sensor seal with clean engine oil before mounting the MAP Sensor onto Intake Manifold. Install the pcv hose back onto the rear of the Intake Manifold, as well as the vacuum brake booster hose if necessary. Route the electrical harness to its desired location over the engine and place the Knock Sensor harness electrical connector to the Intake Manifold, map sensor and Knock Sensor connectors. Last, we install the fuel injectors and Throttle Body.
Related 2007 Chevrolet Silverado 3500 Classic Parts
2007 Chevrolet Silverado 3500 Classic Air Charge Temperature Sensor
2007 Chevrolet Silverado 3500 Classic Air Filter
2007 Chevrolet Silverado 3500 Classic Air Hose
2007 Chevrolet Silverado 3500 Classic Daytime Running Light Relay
2007 Chevrolet Silverado 3500 Classic Fuel Injector
2007 Chevrolet Silverado 3500 Classic Fuel Injector O-Ring
2007 Chevrolet Silverado 3500 Classic Fuel Tank
2007 Chevrolet Silverado 3500 Classic Fuel Tank Sending Unit
2007 Chevrolet Silverado 3500 Classic Gas Cap
2007 Chevrolet Silverado 3500 Classic Intake Manifold Gasket
2007 Chevrolet Silverado 3500 Classic Mass Air Flow Sensor
2007 Chevrolet Silverado 3500 Classic Throttle Body