How to replace the lower control arm (1500) on 2007 GMC Sierra 1500?

Vehicle maintenance starts with lifting and supporting the vehicle before removing the tire and wheel to access the lower Control Arm (1500). First detach the stabilizer shaft link from the lower Control Arm before removing the wheel drive shaft if your car has it. Mechanics wire or its compatible alternative functions as supporting hardware for the combination of knuckle assembly and upper Control Arm. The necessary first step is to separate the lower Ball Joint retaining nut and lower shock module bolts anchored to the lower Control Arm. The j 43631 Ball Joint separator together with j 45851 Ball Joint separator protector adapters allow technicians to remove the lower Ball Joint from the Steering Knuckle. Begin by putting the Control Arm bolts while removing the Control Arm nuts as well as their washers before removing the Control Arm . The lower Control Arm needs position placement before you secure it with Control Arm bolts and washers while following the fastener notice instructions during installation. Apply torque on lower Control Arm retaining nuts to 175 n.m (129 lb ft). The lower Ball Joint needs to go back into the Steering Knuckle while the retaining nut makes the first connection at 110 n.m (81 lb ft). Torque the lower shock absorber module mount bolts to 50 n.m (37 lb ft). You should reinstall first the wheel drive shaft (if present) followed by attaching the stabilizer shaft link to the lower Control Arm. After installation of tire and wheel replace the support, lower the vehicle then perform front end alignment.

OEM 2007 GMC Sierra 1500 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Control Arms found

View related parts
2007 GMC Sierra 1500 Lower Control Arm, Driver Side
Part Number: 20832022
$585.80 MSRP: $812.10
You Save: $226.30 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Driver Side
- Replaces: 12475475, 15103878, 25909326
- Item Weight: 37.90 Pounds
- Item Dimensions: 4.9 x 21.6 x 19.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20832022
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Upper Control Arm, Passenger Side
Part Number: 25812726
$197.00 MSRP: $308.14
You Save: $111.14 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Front Upper Control *Forged Steel; Suspension Control Arm and Ball Joint Assembly.; Arm, Steering Knuckle Upper & Lower Control
- Position: Passenger Side
- Item Weight: 6.70 Pounds
- Item Dimensions: 4.2 x 14.0 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25812726
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Upper Control Arm, Driver Side
Part Number: 25812725
$183.72 MSRP: $308.14
You Save: $124.42 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Front Upper Control *Forged Steel; Suspension Control Arm and Ball Joint Assembly.; Arm, Steering Knuckle Upper & Lower Control
- Position: Driver Side
- Replaces: 15096197
- Item Weight: 6.90 Pounds
- Item Dimensions: 4.3 x 14.3 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25812725
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Lower Control Arm, Passenger Side
Part Number: 25997510
$368.48 MSRP: $627.35
You Save: $258.87 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Passenger Side
- Replaces: 25997508, 25788111
- Item Weight: 14.60 Pounds
- Item Dimensions: 5.8 x 21.2 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25997510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Lower Control Arm, Driver Side
Part Number: 25997509
$380.82 MSRP: $627.35
You Save: $246.53 (40%)
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Replaces: 10355407, 25997507, 25788110
- Item Weight: 14.40 Pounds
- Item Dimensions: 5.8 x 21.4 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25997509
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Lower Control Arm, Passenger Side
Part Number: 20869200
$296.89 MSRP: $509.89
You Save: $213.00 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Passenger Side
- Replaces: 25788113, 25868822
- Item Weight: 24.60 Pounds
- Item Dimensions: 5.8 x 21.4 x 20.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20869200
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Lower Control Arm, Driver Side
Part Number: 20869199
$296.89 MSRP: $509.89
You Save: $213.00 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Replaces: 25788112, 25868821
- Item Weight: 25.10 Pounds
- Item Dimensions: 5.7 x 21.0 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20869199
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Upper Control Arm
Part Number: 25905442
$161.83 MSRP: $277.93
You Save: $116.10 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Front Upper
- Replaces: 15224737, 15110013, 15049881
- Item Weight: 10.90 Pounds
- Item Dimensions: 4.0 x 17.1 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25905442
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Lower Control Arm, Passenger Side
Part Number: 20832023
$585.80 MSRP: $812.10
You Save: $226.30 (28%)
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Passenger Side
- Replaces: 15103879, 25909327, 12475476
- Item Weight: 39.00 Pounds
- Item Dimensions: 4.9 x 21.1 x 19.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20832023
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Upper Control Arm, Front
Part Number: 15864153
$241.13 MSRP: $391.36
You Save: $150.23 (39%)
ADD TO CART
Product Specifications
- Other Name: Arm, Front Upper Control; Suspension Control Arm and Ball Joint Assembly.; Arm, Steering Knuckle Upper & Lower Control
- Position: Front Upper
- Replaces: 15047200
- Item Weight: 7.50 Pounds
- Item Dimensions: 4.8 x 14.9 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15864153
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Lower Control Arm, Front Passenger Side
Part Number: 12478068
Product Specifications
- Other Name: Arm Kit, Front Lower Control (Right-Hand); Suspension Control Arm and Ball Joint Assembly.; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Front Lower Passenger Side
- Replaces: 12477634, 12475524
- Item Weight: 25.10 Pounds
- Item Dimensions: 34.7 x 20.6 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12478068
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 GMC Sierra 1500 Lower Control Arm, Driver Side
Part Number: 12478067
$130.12 MSRP: $204.73
You Save: $74.61 (37%)
Product Specifications
- Other Name: Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Lower Driver Side
- Replaces: 12475523, 12477633
- Item Weight: 24.20 Pounds
- Item Dimensions: 34.4 x 20.4 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12478067
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS

2007 GMC Sierra 1500 Control Arm

With a comprehensive array of OEM 2007 GMC Sierra 1500 Control Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Sierra 1500 Control Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Sierra 1500 Control Arm Parts Questions & Experts Answers

Q: How to replace the lower control arm (1500) on 2007 GMC Sierra 1500?
A: Vehicle maintenance starts with lifting and supporting the vehicle before removing the tire and wheel to access the lower Control Arm (1500). First detach the stabilizer shaft link from the lower Control Arm before removing the wheel drive shaft if your car has it. Mechanics wire or its compatible alternative functions as supporting hardware for the combination of knuckle assembly and upper Control Arm. The necessary first step is to separate the lower Ball Joint retaining nut and lower shock module bolts anchored to the lower Control Arm. The j 43631 Ball Joint separator together with j 45851 Ball Joint separator protector adapters allow technicians to remove the lower Ball Joint from the Steering Knuckle. Begin by putting the Control Arm bolts while removing the Control Arm nuts as well as their washers before removing the Control Arm . The lower Control Arm needs position placement before you secure it with Control Arm bolts and washers while following the fastener notice instructions during installation. Apply torque on lower Control Arm retaining nuts to 175 n.m (129 lb ft). The lower Ball Joint needs to go back into the Steering Knuckle while the retaining nut makes the first connection at 110 n.m (81 lb ft). Torque the lower shock absorber module mount bolts to 50 n.m (37 lb ft). You should reinstall first the wheel drive shaft (if present) followed by attaching the stabilizer shaft link to the lower Control Arm. After installation of tire and wheel replace the support, lower the vehicle then perform front end alignment.