Make sure this part fits

GM 25812726
Upper Control Arm, Passenger Side

2007-2018 GM

Customer Questions & Expert Answers (23)
GM 25812726 Upper Control Arm, Passenger Side
GM 25812726 Upper Control Arm, Passenger Side
  • Part Description
    Arm Assembly-Front Upper Control *Forged Steel; Suspension Control Arm and Ball Joint Assembly.
  • Position
    Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$187.39 MSRP: $314.31
You Save: $126.92 (41%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2016 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2018 Cadillac Escalade ESVBase, Luxury, Platinum, Premium, Premium Luxury8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2016 Chevrolet Silverado 1500Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT, XFE6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2010 Chevrolet Silverado 2500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2010 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2015-2018 Chevrolet SuburbanLS, LT, LTZ, Premier8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2007-2014 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Suburban 2500LS, LT, LTZ8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25812726 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25812726 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the lower control arm for the 2007 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the lower control arm retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the torque specification for the lower ball joint retaining nut for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Tighten it to 100 N.m (74 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    When should the nuts be tightened for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Nuts should not be tightened until the suspension is at the curb height position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after removing the lower control arm for the 2009 Cadillac Escalade? Posted by Customer
    A:
    Take out the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the final steps after installing the components for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the shock module, stabilizer shaft links to the lower control arm, tire and wheel, remove the safety stands, lower the vehicle, and align the front end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after reattaching the shock absorber for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the support for the knuckle and upper control arm, and install the stabilizer shaft link to the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the lower ball joint be inserted into the steering knuckle for the 2010 Cadillac Escalade? Posted by Customer
    A:
    Insert the lower ball joint using the appropriate nut based on whether it has a captured washer or not, and tighten accordingly-125 Nm (92 lb ft) for the captured washer or 50 Nm plus 130 degrees (37 lb ft) for the other.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step after tightening the bolts for the 2010 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the rear axle support and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after installing the upper control arm for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the upper control arm bolts and tighten the nuts to 190 N.m (140 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the torque specification for tightening the upper control arm nuts for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    190 N.m (140 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the process for removing the lower control arm for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the lower control arm nuts and washers, followed by the control arm bolts to take out the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the new lower control arm for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Position the new lower control arm and secure it with the control arm bolts and washers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the upper control arm for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    Position the upper control arm and secure it with the retaining bolt and nut to the axle bracket, followed by the retaining bolt to the frame bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done if it is equipped with an electronic suspension control (ESC) sensor for the 2008 GMC Yukon? Posted by Customer
    A:
    Disconnect the ESC sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What tools are needed to detach the lower ball joint from the steering knuckle for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Utilize J 43631 (Ball Joint Separator) and J 45851 (Ball Joint Separator Protector Adapters).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be detached from the lower control arm for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Detach the stabilizer shaft link from the lower control arm and, if equipped, remove the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the lower control arm be installed for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Position the lower control arm and secure it with the control arm bolts and washers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after removing the support for the steering knuckle and upper control arm for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the wheel drive shaft if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper control arm for the 2009 GMC Yukon? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after reinstalling the components for the 2010 GMC Yukon? Posted by Customer
    A:
    Remove the support for the knuckle and upper control arm, then attach the stabilizer shaft link to the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step after reinstalling the components for the 2010 GMC Yukon? Posted by Customer
    A:
    Reinstall the tire and wheel, lower the vehicle, and verify the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the rear axle upper control arm for the 2009 GMC Yukon? Posted by Customer
    A:
    Raise and support the vehicle at curb height.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Control Arm, Passenger Side 25812726 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25812726 Upper Control Arm, Passenger Side is available in the market under the name GM Control Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25812726 Upper Control Arm, Passenger Side fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 25812726 maintains top performance when functioning as the Arm Assembly-Front Upper Control *Forged Steel; Suspension Control Arm and Ball Joint Assembly. unit at its Passenger Side. The component 25812726 is constructed from durable material and its dimensions span 4.2 x 14.0 x 12.2 inches while weighing 6.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Arm, Steering Knuckle Upper & Lower Control. The part 25812726 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.