How to replace the lower control arm on those equipped with an aluminum lower control arm on 2010 Cadillac Escalade?

The repair process for aluminum lower control arms starts with vehicle suspension and subsequent wheel removal before stabilizer shaft link detachment from the Control Arm and wheel drive shaft removal when necessary. First detach the stabilizer shaft link from the lower Control Arm and disconnect the wheel drive shaft if your vehicle has this part installed. Use mechanics wire or equivalent to support the knuckle assembly with the upper Control Arm. First remove the lower shock module bolt screws from the lower Control Arm then discard the lower Ball Joint retaining nut. The j 43631 (Ball Joint Separator) combined with j 45851 (Ball Joint Separator Protector Adapters) enables technicians to detach the lower Ball Joint from the Steering Knuckle. Take the Control Arm nuts and washers away followed by the Control Arm bolts to extract the Control Arm. Position the lower Control Arm accurately and fasten it with Control Arm bolts coupled with washers for installation. Screw and tighten the lower Control Arm retaining nuts to 175 nm (129 lb ft). If the Steering Knuckle features a captured washer use 125 nm (92 lb ft) torque and 50 nm plus 130 degrees (37 lb ft) if it does not have a captured washer to fasten the lower Ball Joint into position. Fasten the lower shock absorber module mount bolts with torque setting at 50 nm (37 lb ft). Reinstall the wheel drive shaft only if required before removing support for both the Steering Knuckle and upper Control Arm. Reinstall the tire with the wheel before removing support then lowering the vehicle for front end alignment.

OEM 2010 Cadillac Escalade Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Control Arms found

View related parts
2010 Cadillac Escalade Upper Control Arm, Passenger Side
Part Number: 25812726
$183.72 MSRP: $308.14
You Save: $124.42 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Front Upper Control *Forged Steel; Suspension Control Arm and Ball Joint Assembly.; Arm, Steering Knuckle Upper & Lower Control
- Position: Passenger Side
- Item Weight: 6.70 Pounds
- Item Dimensions: 4.2 x 14.0 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25812726
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac Escalade Upper Control Arm, Driver Side
Part Number: 25812725
$183.72 MSRP: $308.14
You Save: $124.42 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Front Upper Control *Forged Steel; Suspension Control Arm and Ball Joint Assembly.; Arm, Steering Knuckle Upper & Lower Control
- Position: Driver Side
- Replaces: 15096197
- Item Weight: 6.90 Pounds
- Item Dimensions: 4.3 x 14.3 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25812725
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac Escalade Lower Control Arm, Passenger Side
Part Number: 25997510
$368.48 MSRP: $627.35
You Save: $258.87 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Passenger Side
- Replaces: 25997508, 25788111
- Item Weight: 14.60 Pounds
- Item Dimensions: 5.8 x 21.2 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25997510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac Escalade Lower Control Arm, Driver Side
Part Number: 25997509
$380.82 MSRP: $627.35
You Save: $246.53 (40%)
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Replaces: 10355407, 25997507, 25788110
- Item Weight: 14.40 Pounds
- Item Dimensions: 5.8 x 21.4 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25997509
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac Escalade Upper Control Arm, Rear
Part Number: 15767252
$96.81 MSRP: $151.65
You Save: $54.84 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Upper Control; Suspension Control Arm; Control Arm; Arm, Rear Axle Control Arm
- Position: Rear Upper
- Replaces: 15133164, 15208540
- Item Weight: 6.50 Pounds
- Item Dimensions: 20.4 x 2.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15767252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Platinum | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac Escalade Lower Control Arm, Rear
Part Number: 22868629
$53.75 MSRP: $92.31
You Save: $38.56 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Trailing Arm; Suspension Control Arm; Control Arm
- Position: Rear
- Item Weight: 8.40 Pounds
- Item Dimensions: 29.4 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22868629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac Escalade Lower Control Arm, Passenger Side
Part Number: 20869202
$308.13 MSRP: $529.19
You Save: $221.06 (42%)
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Passenger Side
- Replaces: 15948968, 22952194, 25788115, 25868824
- Item Weight: 23.60 Pounds
- Item Dimensions: 5.7 x 21.2 x 20.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20869202
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac Escalade Lower Control Arm, Driver Side
Part Number: 20869201
$308.13 MSRP: $529.19
You Save: $221.06 (42%)
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Replaces: 25868823, 15948967, 22952193, 25788114
- Item Weight: 24.50 Pounds
- Item Dimensions: 5.7 x 20.6 x 20.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20869201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2010 Cadillac Escalade Control Arm

With a comprehensive array of OEM 2010 Cadillac Escalade Control Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac Escalade Control Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac Escalade Parts Questions & Experts Answers

Q: How to replace the lower control arm on those equipped with an aluminum lower control arm on 2010 Cadillac Escalade?
A: The repair process for aluminum lower control arms starts with vehicle suspension and subsequent wheel removal before stabilizer shaft link detachment from the Control Arm and wheel drive shaft removal when necessary. First detach the stabilizer shaft link from the lower Control Arm and disconnect the wheel drive shaft if your vehicle has this part installed. Use mechanics wire or equivalent to support the knuckle assembly with the upper Control Arm. First remove the lower shock module bolt screws from the lower Control Arm then discard the lower Ball Joint retaining nut. The j 43631 (Ball Joint Separator) combined with j 45851 (Ball Joint Separator Protector Adapters) enables technicians to detach the lower Ball Joint from the Steering Knuckle. Take the Control Arm nuts and washers away followed by the Control Arm bolts to extract the Control Arm. Position the lower Control Arm accurately and fasten it with Control Arm bolts coupled with washers for installation. Screw and tighten the lower Control Arm retaining nuts to 175 nm (129 lb ft). If the Steering Knuckle features a captured washer use 125 nm (92 lb ft) torque and 50 nm plus 130 degrees (37 lb ft) if it does not have a captured washer to fasten the lower Ball Joint into position. Fasten the lower shock absorber module mount bolts with torque setting at 50 nm (37 lb ft). Reinstall the wheel drive shaft only if required before removing support for both the Steering Knuckle and upper Control Arm. Reinstall the tire with the wheel before removing support then lowering the vehicle for front end alignment.

Related 2010 Cadillac Escalade Parts

Alternate Year Models

2009 Cadillac Escalade Control Arm 2011 Cadillac Escalade Control Arm