Make sure this part fits

GM 20869201
Lower Control Arm, Driver Side

2007-2016 GM

Customer Questions & Expert Answers (19)
GM 20869201 Lower Control Arm, Driver Side
GM 20869201 Lower Control Arm, Driver Side
  • Part Description
    Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
  • Position
    Driver Side
  • Replaces
    25868823, 15948967, 22952193, 25788114
  • Manufacturer
    General Motors
Make sure this part fits
$308.13 MSRP: $529.19
You Save: $221.06 (42%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2016 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2015 Cadillac Escalade ESVBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2014-2016 Chevrolet Silverado 1500Custom, High Country, LS, LT, LTZ, SSV, WT6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
    2015-2016 Chevrolet SuburbanLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2007-2014 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Suburban 2500LS, LT, LTZ8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2007-2016 Chevrolet TahoeHybrid, LS, LT, LTZ, PPV, SSV8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2014-2016 GMC Sierra 1500Base, Denali, SLE, SLT6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20869201 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20869201 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after raising the 2010 Cadillac Escalade ESV? Posted by Customer
    A:
    The lower control arm retaining nuts and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be removed after the tire and wheel for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Remove the stabilizer shaft links from the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the specifications for tightening the lower control arm to frame bolts for the 2009 Cadillac Escalade? Posted by Customer
    A:
    Tighten to 100 Nm (74 lb ft) plus 55 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper control arm for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the lower control arm be installed for the 2010 Cadillac Escalade? Posted by Customer
    A:
    Position the lower control arm and secure it with the control arm bolts and washers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after removing the lower ball joint for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Remove the lower control arm nuts and washers, followed by the control arm bolts, and finally, take out the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in the installation process for the 2007 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the lower control arm and secure it with the retaining bolts, ensuring not to tighten them until the suspension is at ride height.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step after reinstalling the components for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Put the tire and wheel back on, lower the vehicle, and verify the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the rear axle upper control arm for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the lower control arm for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    First raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the upper control arm for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    Position the upper control arm and secure it with the retaining bolt and nut to the axle bracket, followed by the retaining bolt to the frame bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the lower ball joint from the steering knuckle for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Use the J 43631 (Ball Joint Separator) and J 45851 (Ball Joint Separator Protector Adapters).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after tightening the lower shock absorber module mount bolts for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the support for the steering knuckle and upper control arm, then reinstall the wheel drive shaft if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in the installation process of the upper control arm for the 2008 GMC Yukon? Posted by Customer
    A:
    Position the upper control arm and secure it with the retaining bolt and nut to the axle bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    When should the nuts be tightened during installation for the 2009 GMC Yukon? Posted by Customer
    A:
    Nuts should not be tightened until the suspension is at curb height.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the new lower control arm for the 2010 GMC Yukon? Posted by Customer
    A:
    Position the lower control arm and secure it with the control arm bolts and washers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper control arm for the 2010 GMC Yukon? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in the installation process for the 2009 GMC Yukon? Posted by Customer
    A:
    Position the new upper control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Control Arm, Driver Side 20869201 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20869201 Lower Control Arm, Driver Side is available in the market under the name GM Control Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20869201 Lower Control Arm, Driver Side fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 20869201 maintains top performance when functioning as the Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly. unit at its Driver Side. The component 20869201 is constructed from durable material and its dimensions span 5.7 x 20.6 x 20.7 inches while weighing 24.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 20869201 has available replacement options 25868823, 15948967, 22952193, 25788114. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.