How to replace the brake fluid level sensor on 2008 Buick LaCrosse?

In order to replace the indicator switch of the level of the brake fluid, detach the electrical connector of the sensor. Installing the sensor in the reservoir, using needle nose pliers, depresses the retaining tabs and then pulls the sensor out of the reservoir. To install it, the sensor should be fixed and the electrical connector reattached.

OEM 2008 Buick LaCrosse Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2008 Buick LaCrosse Level Sensor Part Number: 18012741
$13.39 MSRP: $25.15
You Save: $11.76 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS

2008 Buick LaCrosse Brake Fluid Level Sensor

With a comprehensive array of OEM 2008 Buick LaCrosse Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick LaCrosse Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick LaCrosse Brake Fluid Level Sensor Parts and Q&A

Q: How to replace the brake fluid level sensor on 2008 Buick LaCrosse?
A: In order to replace the indicator switch of the level of the brake fluid, detach the electrical connector of the sensor. Installing the sensor in the reservoir, using needle nose pliers, depresses the retaining tabs and then pulls the sensor out of the reservoir. To install it, the sensor should be fixed and the electrical connector reattached.