How to properly dispose of a Shock Absorber on 2008 Buick LaCrosse?

To eliminate suspension strut, ensure that you wear appropriate protection around your eyes to guard against injury in case of metal chip come about through drilling. Lay six strips of 3M foam tape on each end of the strut bar. Install each end of the strut bar on the lower control arm pads using an air gun. The strut bar must stay in alignment with the lower control arm pads. Clamp the strut bar horizontally in a vise with the rod fully extended. While the strut bar is in the vise, remove the tire from the wheel, making sure to keep the bead evenly spaced. Install the bead sealer and lower the tire back on to the wheel, but do not completely inflate the tire.-outs. Drilling a hole of 5 mm (3/16 in) at the center of the end cap ; be prepared for gas or gas / oil mixture to be exhausted as soon as the drilling of the struts, use shop towels to hold any escaping oils. After drilling, take the strut out of the vise and position it vertically so that the hole is facing downwards in a drain pan. Finally slide the rod in and out of the tube to ensure all the oil drains out of the strut.

OEM 2008 Buick LaCrosse Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Shock Absorbers found

View related parts
2008 Buick LaCrosse Strut Part Number: 89047814
$77.08 MSRP: $228.19
You Save: $151.11 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Front and Rear Suspension; Complete Strut Assembly Kit; Shock Absorber.; Strut Kit, Front And Rear Suspension
- Position: Rear
- Item Weight: 13.50 Pounds
- Item Dimensions: 9.2 x 8.2 x 25.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89047814
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Strut Part Number: 89060255
$93.95 MSRP: $182.37
You Save: $88.42 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Complete Strut Kit; Shock Absorber.; Strut, Front And Rear Suspension
- Position: Front
- Item Weight: 11.20 Pounds
- Item Dimensions: 8.2 x 25.0 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89060255
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Strut, Rear Part Number: 25913322
Product Specifications
- Other Name: Strut Assembly-Rear Suspension; Shock Absorber; Strut, Front And Rear Suspension
- Position: Rear
- Replaces: 15897969
- Item Weight: 11.30 Pounds
- Item Dimensions: 9.1 x 8.2 x 32.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25913322
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Strut Part Number: 89047815
Product Specifications
- Other Name: Strut, Front and Rear Suspension; Complete Strut Assembly Kit; Shock Absorber.; Strut Kit, Front And Rear Suspension
- Position: Rear
- Item Weight: 13.90 Pounds
- Item Dimensions: 9.3 x 8.2 x 25.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89047815
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Strut Part Number: 89060254
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Complete Strut Kit; Shock Absorber.; Strut, Front And Rear Suspension
- Position: Front
- Item Weight: 9.70 Pounds
- Item Dimensions: 23.9 x 9.8 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89060254
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Strut Part Number: 15898772
$368.98 MSRP: $661.84
You Save: $292.86 (45%)
Product Specifications
- Other Name: Strut Kit, Front And Rear Suspension; Shock Absorber; Absorber, Front And Rear Suspension
- Position: Front
- Item Weight: 11.90 Pounds
- Item Dimensions: 9.4 x 9.5 x 29.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15898772
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS

2008 Buick LaCrosse Shock Absorber

With a comprehensive array of OEM 2008 Buick LaCrosse Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick LaCrosse Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick LaCrosse Shock Absorber Parts and Q&A

Q: How to properly dispose of a Shock Absorber on 2008 Buick LaCrosse?
A: To eliminate suspension strut, ensure that you wear appropriate protection around your eyes to guard against injury in case of metal chip come about through drilling. Lay six strips of 3M foam tape on each end of the strut bar. Install each end of the strut bar on the lower control arm pads using an air gun. The strut bar must stay in alignment with the lower control arm pads. Clamp the strut bar horizontally in a vise with the rod fully extended. While the strut bar is in the vise, remove the tire from the wheel, making sure to keep the bead evenly spaced. Install the bead sealer and lower the tire back on to the wheel, but do not completely inflate the tire.-outs. Drilling a hole of 5 mm (3/16 in) at the center of the end cap ; be prepared for gas or gas / oil mixture to be exhausted as soon as the drilling of the struts, use shop towels to hold any escaping oils. After drilling, take the strut out of the vise and position it vertically so that the hole is facing downwards in a drain pan. Finally slide the rod in and out of the tube to ensure all the oil drains out of the strut.