How to replace the Fuel Pressure Sensor (RPO NU6) on 2008 Buick Lucerne?

To replace the Fuel Tank Pressure Sensor (RPO NU6), first, lift/ raise and appropriately support the vehicle. Disconnect fuel tank wiring harness electrical connector from fuel tank pressure sensor and remove it. To install, position the new fuel tank pressure sensor and connect the fuel tank wiring harness electrical connector to it then lower the vehicle.

OEM 2008 Buick Lucerne Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2008 Buick Lucerne Fuel Pressure Regulator, Passenger Side
Part Number: 16238399
$49.19 MSRP: $101.06
You Save: $51.87 (52%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS

2008 Buick Lucerne Fuel Pressure Sensor

With a comprehensive array of OEM 2008 Buick Lucerne Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Lucerne Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Lucerne Fuel Pressure Sensor Parts Questions & Experts Answers

Q: How to replace the Fuel Pressure Sensor (RPO NU6) on 2008 Buick Lucerne?
A: To replace the Fuel Tank Pressure Sensor (RPO NU6), first, lift/ raise and appropriately support the vehicle. Disconnect fuel tank wiring harness electrical connector from fuel tank pressure sensor and remove it. To install, position the new fuel tank pressure sensor and connect the fuel tank wiring harness electrical connector to it then lower the vehicle.