OEM 2008 Cadillac XLR Coolant Reservoir

2008 Cadillac XLR Coolant Reservoir Parts Questions & Experts Answers

• Q: How to replace the coolant reservoir on 2008 Cadillac XLR?

  A: To replace the coolant reservoir, first drain the cooling system using the Cooling System Draining and Filling (GE 47716). Next, disconnect the reservoir inlet hose from the reservoir using the Hose Clamp Pliers (J 38185) and remove tension on the reservoir inlet hose clamp. Afterwards, use Hose Clamp Pliers (J 38185) to further loosen the pinch on the reservoir outlet hose clamp and remove the reservoir outlet hose from the reservoir. Take off the protective cap from the reservoir upper stud; the reservoir upper nut, followed by the reservoir side nut; and loosen the reservoir side nut. The coolant level sensor, as well as the reservoir, should be disconnected by the electrical connection and removed. For installation: lubricate the I.D. hoses with clean coolant before the installation of the reservoir. Apply the upper reservoir nut and much up all nuts to 8 N.m (71 lb in). Replace protective cap on upper stud of reservoir, connect the coolant level sensor electrical connector, connect the reservoir outlet hose to the reservoir and install tension onto the reservoir outlet hose clamp. Finally tie in the reservoir inlet hose to the reservoir and apply tension to the reservoir inlet hose clamp and fill the cooling system with the help of Cooling System Draining and Filling (GE 47716).