OEM 2008 Cadillac XLR Oil Filter

2008 Cadillac XLR Parts Questions & Experts Answers

• Q: How to Replace an Engine Oil Filter on 2008 Cadillac XLR?

  A: The first step for replacing engine oil and Oil Filter requires a vehicle lift followed by support underneath. Set the drain pan under the engine oil Drain Plug before removing it. Lowly inspect the Drain Plug before you decide to replace it when required. You should also check the Oil Pan sealing surface after which you must repair or replace the Oil Pan as needed. Before installing the new filter remove it from its housing and examine both the filter housing and adapter surface for any damage. Then replace the existing or repair it. Install the new Oil Filter into position then fill it with oil before applying clean oil to its gasket surface before tightening to 32 n.m (24 lb ft). Insert the Drain Plug of the engine oil then fasten it to 20 n.m (15 lb ft) torque. Metallic tools should be used to decrease the vehicle height while filling the engine with fresh oil and checking the recommended fluid volumes. Verify the engine for any sign of oil leakage after powering it up.