OEM 2008 Chevrolet Aveo A/C Accumulator

Accumulator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

  • 2008 Chevy Aveo A/C Accumulator - 96539635
    2008 Chevy Aveo A/C Accumulator Diagram - 96539635
    View related parts

    2008 Chevrolet Aveo Dehydrator

    Part Number: 96539635
    $51.70 MSRP: $93.58
    You Save: $41.88 (45%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Dryer, A/C Refrigerant; Drier Desiccant Element; Dryer, Air Conditioning; A/C Receiver Drier; A/C Accumulator; Drier
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 12.5 x 2.2 x 2.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 96539635
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2008 Chevrolet Aveo Submodels:
    • Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo A/C Accumulator

With a comprehensive array of OEM 2008 Chevrolet Aveo A/C Accumulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo A/C Accumulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Parts Questions & Experts Answers

  • Q: How to replace the A/C Accumulator on 2008 Chevrolet Aveo?
    A: To replace the accumulator, one has to remove the negative Battery Cable and recover the refrigerant. Dismount the screw attached to the receiver-dryer band clamp, then extract the receiver-dryer with the bolts. Drain off the oil from the receiver-dryer into a container and then discard the used oil. Later on, measure the amount of oil. Before you install the new receiver-dryer, you should add the same amount of oil that was drained off. Mount new o-rings at the seal area recess of new receiver-dryer and mount in the clamp. Install the connector block retaining bolt to the receiver-dryer and tighten it to 14 n.m (10 lb ft) and then install and tighten a band clamp bolt. Finally, reconnect the negative cable and leave the vehicle and recharge the a/c system.

Related 2008 Chevrolet Aveo Parts