How to replace the blower motor resistor on 2008 Chevrolet Aveo?

Disconnect the electric connector and Battery Cable from the resistor before you try to replace it. Take out the retaining screws from the resistor, then gently pull it downward to take it out. Install the resistor by putting it in the heater/air distribution case and fastening it with the screws to 6 n.m (53 lb in) of torque. Connect the electrical plug to the resistor and later connect the negative Battery Cable back. In the end, confirm that the blower is working well.

OEM 2008 Chevrolet Aveo Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2008 Chevrolet Aveo Resistor
Part Number: 96435889
$31.40 MSRP: $56.84
You Save: $25.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor, Blower Motor; Blower Motor Resistor; Resistor, A/C Evaporator Blower
- Replaces: 96539658
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.4 x 4.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96435889
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo Blower Motor Resistor

With a comprehensive array of OEM 2008 Chevrolet Aveo Blower Motor Resistor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo Blower Motor Resistor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the blower motor resistor on 2008 Chevrolet Aveo?
A: Disconnect the electric connector and Battery Cable from the resistor before you try to replace it. Take out the retaining screws from the resistor, then gently pull it downward to take it out. Install the resistor by putting it in the heater/air distribution case and fastening it with the screws to 6 n.m (53 lb in) of torque. Connect the electrical plug to the resistor and later connect the negative Battery Cable back. In the end, confirm that the blower is working well.