How to replace the A/C Switch in a hatchback on 2008 Chevrolet Aveo?

To remove the A/C Switch in a hatchback, first remove the negative cable from the battery. Pull out the instrument panel lower cover and remove the hvac controller retention screws. Remove the cable and pull it out, making sure you remember where the cables and their housings were to replace them later. Very carefully try to remove the cable eyelet and unsnap the cable housing from the mechanical slide to remove the mechanical control cables and remove the electrical connectors. For the installation, connect the electrical sockets to the necessary sockets in the back of the controller, install the mechanical cable housings in the respective positions and push the eyelets against the relevant posts. Put the controller into the Center Console, then install the lower left and lower right controller retaining screws and tighten them to 3 n.m (27 lb in). Reinstate the instrument panel lower cover and replace the negative Battery Cable. Finally, check the work of the controller in all its positions of its operating.

OEM 2008 Chevrolet Aveo A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Switches found

View related parts
2008 Chevrolet Aveo Heater Control
Part Number: 96643210
$18.48 MSRP: $159.14
You Save: $140.66 (89%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Air Conditioner Electric Temperature And Motor Control; Climate Control Module; Blower Control Switch; Dash Control Unit; Switch, A/C Electric Temperature And Motor Control
- Item Weight: 2.30 Pounds
- Item Dimensions: 13.6 x 6.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96643210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo Heater Control, Black
Part Number: 96650500
Product Specifications
- Other Name: Switch Assembly, Heater & A/C Programmer Blower *Black; Climate Control Module; Blower Control Switch; Switch, A/C Electric Temperature And Motor Control
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.3 x 6.2 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96650500
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo Heater Control, Beige; Black
Part Number: 96437334
Product Specifications
- Other Name: Switch, Air Conditioner Electric Temperature And Motor Control; Climate Control Module; Blower Control Switch; Dash Control Unit; Switch, A/C Electric Temperature And Motor Control
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.2 x 20.0 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96437334
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo Heater Control
Part Number: 96618920
Product Specifications
- Other Name: Switch, Air Conditioner Electric Temperature And Motor Control; Climate Control Module; Blower Control Switch; Dash Control Unit; Switch, A/C Electric Temperature And Motor Control
- Item Weight: 1.50 Pounds
- Item Dimensions: 11.8 x 9.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96618920
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo Fan Switch
Part Number: 96475871
Product Specifications
- Other Name: Switch Assembly, Heater Control Blower; Climate Control Module; Blower Control Switch; Blower Motor Switch; Switch, Heater Control
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.2 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96475871
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo Fan Switch
Part Number: 96618807
Product Specifications
- Other Name: Switch Assembly, Heater Control Blower; Climate Control Module; Blower Control Switch; Blower Motor Switch; Switch, Heater Control
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96618807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo A/C Switch

With a comprehensive array of OEM 2008 Chevrolet Aveo A/C Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo A/C Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the A/C Switch in a hatchback on 2008 Chevrolet Aveo?
A: To remove the A/C Switch in a hatchback, first remove the negative cable from the battery. Pull out the instrument panel lower cover and remove the hvac controller retention screws. Remove the cable and pull it out, making sure you remember where the cables and their housings were to replace them later. Very carefully try to remove the cable eyelet and unsnap the cable housing from the mechanical slide to remove the mechanical control cables and remove the electrical connectors. For the installation, connect the electrical sockets to the necessary sockets in the back of the controller, install the mechanical cable housings in the respective positions and push the eyelets against the relevant posts. Put the controller into the Center Console, then install the lower left and lower right controller retaining screws and tighten them to 3 n.m (27 lb in). Reinstate the instrument panel lower cover and replace the negative Battery Cable. Finally, check the work of the controller in all its positions of its operating.