OEM 2008 Chevrolet Aveo Rack And Pinion

Steering Rack And Pinion
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack And Pinion found

  • 2008 Chevy Aveo Rack And Pinion - 95918426
    2008 Chevy Aveo Rack And Pinion Diagram - 95918426
    View related parts
    Product Specifications
    • Other Name: Gear Assembly, Steering; Gear Assembly; Gear, Steering
    • Replaces: 96806653
    • Item Weight: 15.50 Pounds
    • Item Dimensions: 61.8 x 10.5 x 10.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 95918426
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2008 Chevrolet Aveo Submodels:
    • LS, LT | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo Rack And Pinion

With a comprehensive array of OEM 2008 Chevrolet Aveo Rack And Pinion, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo Rack And Pinion are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Parts Questions & Experts Answers

  • Q: How to Replace the Front Rack and Pinion Steering Gear on 2008 Chevrolet Aveo?
    A: Starting with equipment placement and tire alignment through Steering Wheel movement it becomes possible to remove both intermediate shaft and front tire and wheel assemblies. Take out power steering fluid from the Rack And Pinion while disconnecting inlet and outlet pipe fittings from the Rack And Pinion and removing outer tie rod hex nuts. To disconnect the stabilizer shaft from the knuckle you must first remove ball joint hex nuts then remove the stabilizer shaft link assembly. Disconnect the Rack And Pinion assembly by removing Rack And Pinion retaining bracket nuts after freeing the cross member from the underbody with final removal of the Rack And Pinion assembly. To secure the Rack And Pinion assembly through the Rack And Pinion retaining bracket nuts use a torque of 50 n.m (37 lb ft). Fasten down the cross member with nuts and bolts at a torque setting of 150 n.m (111 lb ft). The stabilizer shaft needs to connect to the knuckle while you tighten the bolt from the stabilizer shaft link assembly to 45 n.m (33 lb ft) torque and securely fasten ball joint hex nuts to 45 n.m (33 lb ft). Mount the outer tie rod hex nuts with 45 n.m (33 lb ft) torque then fit the Rack And Pinion pipe connections which require 22 n.m (16 lb ft) nut torque. You should reinstall both front tires along with their assemblies and replace power steering fluid with material that meets gm spec. No. 9985010 or equivalent before you install the intermediate shaft. Examine the car before assessing wheel alignment then adjust the front toe as needed.

Related 2008 Chevrolet Aveo Parts