How to replace the wheel cylinder on 2008 Chevrolet Colorado?

First lift the vehicle before starting the Wheel Cylinder replacement. Take off the rear Brake Shoe parts before disconnecting the Brake Line from the Wheel Cylinder and plugging it to stop contaminants from entering. Take off the Wheel Cylinder by first unthreading the mounting bolts then removing it from the backing plate. Secure the new Wheel Cylinder onto the backing plate by placing its mounting bolts and tightening them to 13 lb ft (18 N.m). Fit the Brake Line fitting to the Wheel Cylinder and secure it with 19 n.m final torque (14 lb ft). You should install the new brake shoes in the rear and perform proper brake system bleeding procedures. Bring the vehicle down to the ground and measure the master cylinder reservoir level for fluid.

OEM 2008 Chevrolet Colorado Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Cylinder found

View related parts
2008 Chevrolet Colorado Wheel Cylinder, Rear Part Number: 19213348
Product Specifications
- Other Name: Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit; Cylinder, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 89058902
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.5 x 4.4 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19213348
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2008 Chevrolet Colorado Wheel Cylinder

With a comprehensive array of OEM 2008 Chevrolet Colorado Wheel Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Wheel Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Wheel Cylinder Parts and Q&A

Q: How to replace the wheel cylinder on 2008 Chevrolet Colorado?
A: First lift the vehicle before starting the Wheel Cylinder replacement. Take off the rear Brake Shoe parts before disconnecting the Brake Line from the Wheel Cylinder and plugging it to stop contaminants from entering. Take off the Wheel Cylinder by first unthreading the mounting bolts then removing it from the backing plate. Secure the new Wheel Cylinder onto the backing plate by placing its mounting bolts and tightening them to 13 lb ft (18 N.m). Fit the Brake Line fitting to the Wheel Cylinder and secure it with 19 n.m final torque (14 lb ft). You should install the new brake shoes in the rear and perform proper brake system bleeding procedures. Bring the vehicle down to the ground and measure the master cylinder reservoir level for fluid.