How to replace the wheel cylinder on Chevrolet Colorado?

Lift the vehicle to access the Wheel Cylinder and remove all brake shoes behind it first. To keep dirt out protect the Brake Line opening using a plug when disconnecting it from the Wheel Cylinder. Unbolt the Wheel Cylinder and set it off the backing plate to move forward. After positioning the new Wheel Cylinder on the backing plate simply attach it with the mounting bolts and tighten them to 13 ft. Lbs. (18 Nm). Push the Brake Line rubber plug aside and link it to the Wheel Cylinder before placing the Brake Line fitting tightly at 19 nm (14 ft. Lbs.). Put back the brake shoes at the back and you need to purge the brake system. Lift up the vehicle once work is finished and make sure your master cylinder holds enough brake fluid.

OEM Chevrolet Colorado Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Cylinders found

View related parts
Chevrolet Colorado Wheel Cylinder Part Number: 25832114
$41.64 MSRP: $77.71
You Save: $36.07 (47%)
ADD TO CART
Product Specifications
- Other Name: Cylinder, Wheel Brake Cylinder/Caliper; Wheel Cylinder Repair Kit
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Wheel Cylinder, Rear Part Number: 19213348
Product Specifications
- Other Name: Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit; Cylinder, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 89058902
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

Chevrolet Colorado Wheel Cylinder

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Cylinder. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Colorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Colorado Wheel Cylinder includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Colorado Wheel Cylinder is active mechanism the puts pressure on the brake shoe in a way to make it clamp on to the brake drum so as to reduce or stop the vehicle's movement. This hydraulic system using the pistons and rubber seals in a cylinder that enable it to operate like a push/pull system to produce the friction needed for Brake. The wheel cylinder is usually made up of aluminum thus avoiding rusting, and guaranteeing performance for a long time. In the case of Chevrolet Colorado, a wheel cylinder that is in a bad shape or is leaking will compromise on the braking force and would be unsafe for use on the roads. It is very necessary that these are checked and supervised frequently or at least annually to clear any barrier that may hinder smooth functioning. Depending on the extent of the problem and if the wheel cylinder has to be replaced, then a rebuild kit is used which comes with new seals, boots and springs. Frequently solving such problems, drivers can keep the specified level of braking in their Chevrolet Colorado cars.

Chevrolet Colorado Wheel Cylinder Parts Questions & Experts Answers

Wheel Cylinder, Rear
19213348
Q: How to replace the wheel cylinder on Chevrolet Colorado?
A:
Lift the vehicle to access the Wheel Cylinder and remove all Brake Shoes behind it first. To keep dirt out protect the Brake Line opening using a plug when disconnecting it from the Wheel Cylinder. Unbolt the Wheel Cylinder and set it off the backing plate to move forward. After positioning the new Wheel Cylinder on the backing plate simply attach it with the mounting bolts and tighten them to 13 ft. Lbs. (18 Nm). Push the Brake Line rubber plug aside and link it to the Wheel Cylinder before placing the Brake Line fitting tightly at 19 nm (14 ft. Lbs.). Put back the brake shoes at the back and you need to purge the brake system. Lift up the vehicle once work is finished and make sure your master cylinder holds enough brake fluid.