How to replace a Brake Disc on Chevrolet Colorado?

Brake linings should never be ground during disc replacement while brake parts must be cleaned with water to protect against asbestos dust dispersion. Apply a wet cloth to collect dust from brake components. Keep brake fluid away from painted parts and electrical pieces because it can harm them. Clean up any leakage with water before using a new cloth. First check brake fluid level in brake master cylinder reservoir and use proper tool to drain excess fluid if fluid level sits above the halfway line between maximum and minimum points. Put wood blocks below the Wheel Hub/Brake Disc assembly then take out the hub/speed sensor unit. Pull off the bolts that hold the Brake Disc to the wheel bearing/hub assembly and lift up the disc. Clean the surfaces between hub components before starting the work. Clear all rust present by cleaning both sides of the hub flange and disc before reinstalling the wheel bearing and Brake Disc unit. Set the wheel bearing/hub on the Brake Disc through the proper fasteners at their designated spots and abstain from applying paints or lubricants to the fasteners. Fit the wheel bearing/hub mounting bolts in crosswise order and tighten them to 20 nm (15 ft. Lbs.) then to 110 nm (81 ft. Lbs.). Replace the Wheel Hub assembly into the steering knuckle while lowering the car. Then check brake fluid levels before completing the job by braking on a smooth surface.

OEM Chevrolet Colorado Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Discs found

View related parts
Chevrolet Colorado Rotor Part Number: 94775725
$141.37 MSRP: $274.38
You Save: $133.01 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Colorado | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Rotor, Rear Part Number: 23387173
$104.66 MSRP: $203.14
You Save: $98.48 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Replaces: 94778644
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Colorado | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Rotor Part Number: 89040374
$107.33 MSRP: $200.27
You Save: $92.94 (47%)
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado Rotor Part Number: 85158898
$113.22 MSRP: $221.66
You Save: $108.44 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake
- Replaces: 84703914
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Rotor, Rear Part Number: 84309171
$91.68 MSRP: $177.93
You Save: $86.25 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake (Coated); Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Rotor Part Number: 13549409
$90.32 MSRP: $161.29
You Save: $70.97 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Chevrolet Colorado | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Colorado Rotor, Rear Part Number: 13539733
$94.16 MSRP: $168.14
You Save: $73.98 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake (Coated); Rotor, Front And Rear Wheel Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Chevrolet Colorado | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Colorado Rotor, Front Part Number: 25832146
Product Specifications
- Other Name: Rotor Assembly-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Colorado Brake Disc

Want to cut long-term maintenance and repair costs? Choose OEM Brake Disc. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Colorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Colorado Brake Disc includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Colorado has brake disc, which is a crucial component of the braking system; thereby, the brake disc in combination with the brake pads helps pedal the truck and bring it to a standstill. If the brake pedal is pressed the pads move to the area surrounding the Brake Disc and apply enough friction to slow or halt the wheels. Constructed from gray iron these discs can also incorporate modern materials such carbon fiber or ceramic matrix in high end vehicles due to the discs high operating temperatures and the need for reduced weight. Through the years Chevrolet Colorado has used drilled and slotted brake disc especially for enhanced heat dissipation and minimal noise at the expense of increased pad wear. The discs are two-piece: the friction ring is separated from the center section in order to improve weight and thermal properties. It is important to state that such problems as warping, cracking, or rusting can undermine the braking performance, it is why frequent inspections and pad change are required for the vehicle safe handling.

Chevrolet Colorado Brake Disc Parts Questions & Experts Answers

Rotor
89040374
Q: How to replace a Brake Disc on Chevrolet Colorado?
A:
Brake linings should never be ground during disc replacement while brake parts must be cleaned with water to protect against asbestos dust dispersion. Apply a wet cloth to collect dust from brake components. Keep brake fluid away from painted parts and electrical pieces because it can harm them. Clean up any leakage with water before using a new cloth. First check brake fluid level in brake master cylinder reservoir and use proper tool to drain excess fluid if fluid level sits above the halfway line between maximum and minimum points. Put wood blocks below the Wheel Hub/Brake Disc assembly then take out the hub/speed sensor unit. Pull off the bolts that hold the Brake Disc to the wheel bearing/hub assembly and lift up the disc. Clean the surfaces between hub components before starting the work. Clear all rust present by cleaning both sides of the hub flange and disc before reinstalling the wheel bearing and Brake Disc unit. Set the wheel bearing/hub on the Brake Disc through the proper fasteners at their designated spots and abstain from applying paints or lubricants to the fasteners. Fit the wheel bearing/hub mounting bolts in crosswise order and tighten them to 20 nm (15 ft. Lbs.) then to 110 nm (81 ft. Lbs.). Replace the Wheel Hub assembly into the steering knuckle while lowering the car. Then check brake fluid levels before completing the job by braking on a smooth surface.