OEM 2008 Chevrolet Equinox Seat Heater Pad

2008 Chevrolet Equinox Parts Questions & Experts Answers

• Q: How to replace the Driver Seat Heater Pad and Passenger Seat Heater Pad with the Passenger Presence System on 2008 Chevrolet Equinox?

  A: The first step to swap from the driver seat and passenger seat cushion heater to the passenger presence system begins by removing the vehicle front seat onto a clean workbench. Follow by removing the seat cushion cover alongside its pad yet maintain the original heater element inside the seat foam while protecting both inflatable restraint passenger presence system (PPS) and foam pad. A second repair requires separation and removal of the service heater element from the original element because stacking multiple elements on top of the pps should not exceed two elements. Trim the wiring harness of the old heater element at its base where it connects to the element. Install the heater element by removing its self-stick tape from the back then placing it onto the chair foam pad and ensuring proper alignment of tabs and holes. After securing the adhesive with pressure make the necessary hookups between the heating element wiring harness and heater module while securing the wire with tie straps. After replacing the seat cushion cover and pad install the front seat back into the vehicle. Running a passenger presence system preload test becomes essential after performing any passenger seat repairs thus require preloading the inflatable restraint system in the front passenger seat.