How to replace the MAP Sensor on 2008 Chevrolet Equinox?

Start by separating the manifold absolute pressure (MAP) sensor electrical connector to replace the manifold absolute pressure sensor. First separate the MAP Sensor retaining bolt from its bracket before pulling out both the MAP Sensor and its port seal when present in the Intake Manifold. Place the MAP Sensor onto the Intake Manifold after following the fastener notice. Install the MAP Sensor retaining bracket while adding the bolt and apply 10 n.m (89 lb in) torque to the bolt. Last step, reattach the electrical connector to the MAP Sensor.

OEM 2008 Chevrolet Equinox MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2008 Chevrolet Equinox M.A.P. Sensor
Part Number: 19418807
$76.01 MSRP: $147.51
You Save: $71.50 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2008 Chevrolet Equinox MAP Sensor

With a comprehensive array of OEM 2008 Chevrolet Equinox MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Equinox MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Equinox Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2008 Chevrolet Equinox?
A: Start by separating the manifold absolute pressure (MAP) sensor electrical connector to replace the manifold absolute pressure sensor. First separate the MAP Sensor retaining bolt from its bracket before pulling out both the MAP Sensor and its port seal when present in the Intake Manifold. Place the MAP Sensor onto the Intake Manifold after following the fastener notice. Install the MAP Sensor retaining bracket while adding the bolt and apply 10 n.m (89 lb in) torque to the bolt. Last step, reattach the electrical connector to the MAP Sensor.