How to replace the Heated Oxygen Sensor 2 on 2008 Chevrolet Equinox?

Before changing the heated Oxygen Sensor-2, one needs to lift the vehicle. Remove the ho2s 2 harness connector, avoiding any contamination from the use of silicone-based products in the vicinity of the ho2s. Apply a liquid penetrate before removing the sensor then remove the ho2s 2 from the Exhaust Pipe. For installation, it is recommended to use a small amount of nickel-based anti-seize compound while avoiding silicone-based products on the threads of the ho2s 2. Install the ho2s 2 and fasten it with a torque of 42 n.m (31 lb ft). Connect the ho2s 2 harness connector by pushing it in until a click is heard and then pull back the same to verify positive engagement. Finally, make sure the ho2s 2 harness pigtail connector is firmly attached to the chassis.

OEM 2008 Chevrolet Equinox Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oxygen Sensors found

View related parts
2008 Chevrolet Equinox Oxygen Sensor
Part Number: 19353381
$130.34 MSRP: $244.38
You Save: $114.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Replaces: 12594935
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.1 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19353381
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Oxygen Sensor
Part Number: 12596688
$92.87 MSRP: $188.62
You Save: $95.75 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 2); Sensor, Computer Control Sensors
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 3.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12596688
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Oxygen Sensor
Part Number: 12590790
$54.69 MSRP: $102.72
You Save: $48.03 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Replaces: 12583290
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.5 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12590790
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
2008 Chevrolet Equinox Oxygen Sensor
Part Number: 12608693
$38.44 MSRP: $119.90
You Save: $81.46 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 2); Rear Oxygen Sensor; Sensor, Computer Control Sensors
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608693
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2008 Chevrolet Equinox Oxygen Sensor

With a comprehensive array of OEM 2008 Chevrolet Equinox Oxygen Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Equinox Oxygen Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Equinox Parts Questions & Experts Answers

Q: How to replace the Heated Oxygen Sensor 2 on 2008 Chevrolet Equinox?
A: Before changing the heated Oxygen Sensor-2, one needs to lift the vehicle. Remove the ho2s 2 harness connector, avoiding any contamination from the use of silicone-based products in the vicinity of the ho2s. Apply a liquid penetrate before removing the sensor then remove the ho2s 2 from the Exhaust Pipe. For installation, it is recommended to use a small amount of nickel-based anti-seize compound while avoiding silicone-based products on the threads of the ho2s 2. Install the ho2s 2 and fasten it with a torque of 42 n.m (31 lb ft). Connect the ho2s 2 harness connector by pushing it in until a click is heard and then pull back the same to verify positive engagement. Finally, make sure the ho2s 2 harness pigtail connector is firmly attached to the chassis.

Related 2008 Chevrolet Equinox Parts

Alternate Year Models

2007 Chevrolet Equinox Oxygen Sensor 2009 Chevrolet Equinox Oxygen Sensor