How to replace the Knock Sensor for Bank 1 on 2008 Chevrolet Equinox?

Start replacing the Bank 1 Knock Sensor by supporting and elevating the vehicle. Before knocking sensor replacement disconnect the engine wiring harness electrical connector from the knock sensor on both FWD and AWD vehicles. The knock sensor bolt requires loosening before the knock sensor can be removed. You should not use threadlocker on knock sensor threads because their factory coating protects the detonation detection function. Proceed according to the standards outlined in the Fastener Notice. Fasten the knock sensor into its proper position on the engine before torquing the bolt to 25 N.m (18 lb ft). When working on an AWD system connect the engine wiring harness electrical connector to the knock sensor and the same steps apply to FWD systems. Finally, lower the vehicle.

OEM 2008 Chevrolet Equinox Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2008 Chevrolet Equinox Knock Sensor
Part Number: 12618603
$37.07 MSRP: $69.61
You Save: $32.54 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12566845
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.6 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12618603
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- Sport | 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Knock Sensor
Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2008 Chevrolet Equinox Knock Sensor

With a comprehensive array of OEM 2008 Chevrolet Equinox Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Equinox Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Equinox Parts Questions & Experts Answers

Q: How to replace the Knock Sensor for Bank 1 on 2008 Chevrolet Equinox?
A: Start replacing the Bank 1 Knock Sensor by supporting and elevating the vehicle. Before knocking sensor replacement disconnect the engine wiring harness electrical connector from the knock sensor on both FWD and AWD vehicles. The knock sensor bolt requires loosening before the knock sensor can be removed. You should not use threadlocker on knock sensor threads because their factory coating protects the detonation detection function. Proceed according to the standards outlined in the Fastener Notice. Fasten the knock sensor into its proper position on the engine before torquing the bolt to 25 N.m (18 lb ft). When working on an AWD system connect the engine wiring harness electrical connector to the knock sensor and the same steps apply to FWD systems. Finally, lower the vehicle.

Related 2008 Chevrolet Equinox Parts

Alternate Year Models

2007 Chevrolet Equinox Knock Sensor 2009 Chevrolet Equinox Knock Sensor