How to replace the knock sensor on Bank 1 on 2007 Chevrolet Equinox?

The initial step in changing Bank 1's knock sensor requires vehicle elevation and support. Before changing the knock sensor, remove the engine wiring harness electrical connector from the knock sensor for both FWD and all wheel drive systems. After loosing the bolt holding the knock sensor in place, extract the sensor. The sensor threads receive factory coating and adding threadlocker during installation will degrade the sensor's detonation detection ability. Secure the knock sensor onto the engine with a bolt torque of 25 N.m (18 lb ft). The installation process requires AWD users to connect their engine wiring harness electrical connector to the knock sensor and FWD users to complete the same connection. Finally, lower the vehicle.

OEM 2007 Chevrolet Equinox Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2007 Chevrolet Equinox Knock Sensor Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2007 Chevrolet Equinox Knock Sensor

With a comprehensive array of OEM 2007 Chevrolet Equinox Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Equinox Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Equinox Knock Sensor Parts and Q&A

Q: How to replace the knock sensor on Bank 1 on 2007 Chevrolet Equinox?
A: The initial step in changing Bank 1's knock sensor requires vehicle elevation and support. Before changing the knock sensor, remove the engine wiring harness electrical connector from the knock sensor for both FWD and all wheel drive systems. After loosing the bolt holding the knock sensor in place, extract the sensor. The sensor threads receive factory coating and adding threadlocker during installation will degrade the sensor's detonation detection ability. Secure the knock sensor onto the engine with a bolt torque of 25 N.m (18 lb ft). The installation process requires AWD users to connect their engine wiring harness electrical connector to the knock sensor and FWD users to complete the same connection. Finally, lower the vehicle.