How to replace the Parking Brake Cable Front on 2008 Chevrolet Express 2500?

The replacement of the Parking Brake Front Cable requires starting with brakedown of the park brake followed by removal of the park brake pedal. To access the cable anchor nut and grommet through the carpet roll-back stage you should remove the cable anchor nut followed by the cable and grommet from the floor surface. Lift the vehicle before separating the front cable from its intermediate connection and removing it from the frame bracket through its retainers. Begin installation by inserting the new cable and after that push the retaining tabs into place inside the frame bracket. Thread the front cable to the intermediate cable and direct the cable underneath the floor pan by inserting the grommet. Lower the vehicle then install the floor cable anchor on its mounting stud by tightening the anchor nut to 13 N.m (115 lb in). The park brake pedal gets installed with carpet replacement while the final step involves adjusting the park brake system.

OEM 2008 Chevrolet Express 2500 Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Cables found

View related parts
2008 Chevrolet Express 2500 Rear Cable
Part Number: 20779564
$75.43 MSRP: $134.76
You Save: $59.33 (45%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 25752970, 25941144
- Item Weight: 1.90 Pounds
- Item Dimensions: 11.3 x 11.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20779564
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2008 Chevrolet Express 2500 Rear Cable
Part Number: 20779562
$39.14 MSRP: $69.89
You Save: $30.75 (44%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 25752971, 25941142, 15942865
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.1 x 11.6 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20779562
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2008 Chevrolet Express 2500 Front Cable
Part Number: 15208793
$34.80 MSRP: $62.14
You Save: $27.34 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Item Weight: 1.60 Pounds
- Item Dimensions: 13.7 x 13.5 x 3.4 inches
- Condition: New
- SKU: 15208793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2008 Chevrolet Express 2500 Intermediate Cable
Part Number: 25892521
Product Specifications
- Other Name: Cable Assembly-Parking Brake Intermediate; Brake Cable; Cable, Parking Brake
- Replaces: 25745118
- Item Weight: 0.50 Pounds
- Item Dimensions: 49.2 x 0.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25892521
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2008 Chevrolet Express 2500 Intermediate Cable
Part Number: 25892520
Product Specifications
- Other Name: Cable Assembly-Parking Brake Intermediate; Brake Cable; Cable, Parking Brake
- Replaces: 25745117
- Item Weight: 0.50 Pounds
- Item Dimensions: 29.4 x 0.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25892520
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2008 Chevrolet Express 2500 Parking Brake Cable

With a comprehensive array of OEM 2008 Chevrolet Express 2500 Parking Brake Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Express 2500 Parking Brake Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Express 2500 Parking Brake Cable Parts Questions & Experts Answers

Q: How to replace the Parking Brake Cable Front on 2008 Chevrolet Express 2500?
A: The replacement of the Parking Brake Front Cable requires starting with brakedown of the park brake followed by removal of the park brake pedal. To access the cable anchor nut and grommet through the carpet roll-back stage you should remove the cable anchor nut followed by the cable and grommet from the floor surface. Lift the vehicle before separating the front cable from its intermediate connection and removing it from the frame bracket through its retainers. Begin installation by inserting the new cable and after that push the retaining tabs into place inside the frame bracket. Thread the front cable to the intermediate cable and direct the cable underneath the floor pan by inserting the grommet. Lower the vehicle then install the floor cable anchor on its mounting stud by tightening the anchor nut to 13 N.m (115 lb in). The park brake pedal gets installed with carpet replacement while the final step involves adjusting the park brake system.