How to replace the rear side door handle on 2008 Chevrolet Impala?

The process to replace the rear side door outside handle starts with removing the rear door trim panel alongside the rear door water deflector followed by opening the window to its uppermost position. Masking tape should be applied to the outside handle area to shield the paint from damage. Open the outside handle rod to lock clip that exists on the Door Lock before taking out the rear Door Lock. After removing the outside Door Handle bolt access tape you need to take out the three bolts from the rear Door Handle which must be followed by inserting the outside handle bolt through the latch hole. Remove the outside handle and the rod fittings from the door. Install the outside Door Handle and rod on the door before inserting the outside handle bolt through the latch hole then tighten it to 10 n.m (89 lb in). Once the rear Door Handle receives its three bolts and each one is secured to 10 n.m (89 lb in) torque measurement, employees move on to installing the rear Door Lock and outside Door Handle bolt access tape. Complete the outside Door Handle rod installation by putting it into the clip before closing the clip cover. First verify correct operation of the outside Door Handle then take off the masking tape before putting on the rear door water deflector and the rear door trim panel.

OEM 2008 Chevrolet Impala Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Door Handles found

View related parts
2008 Chevrolet Impala Grip Handle, Titanium, Rear
Part Number: 15924263
$6.13 MSRP: $9.12
You Save: $2.99 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Rear Quarter And Roof Rail Assist
- Position: Rear
- Replaces: 15833730
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.7 x 2.4 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15924263
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Handle, Outside, Rear Driver Side
Part Number: 25889998
$61.28 MSRP: $91.20
You Save: $29.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Rear Side Door Outside *Service Primer; Exterior Door Handle; Handle, Door Outside Handle
- Position: Rear Driver Side
- Replaces: 25784004
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.3 x 3.3 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25889998
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Handle, Outside, Passenger Side
Part Number: 25889997
$50.49 MSRP: $73.51
You Save: $23.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Passenger Side
- Replaces: 25784001
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.3 x 3.4 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25889997
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Grip Handle, Rear
Part Number: 15924264
$23.69 MSRP: $35.26
You Save: $11.57 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Rear Quarter And Roof Rail Assist
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.7 x 2.4 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15924264
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Handle, Outside, Driver Side
Part Number: 15773794
$8.88 MSRP: $13.90
You Save: $5.02 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.7 x 4.5 x 15.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15773794
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Pull Handle, Rear
Part Number: 25772898
$0.18 MSRP: $0.27
You Save: $0.09 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Rear Compartment
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 4.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25772898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Handle, Outside, Passenger Side
Part Number: 15773793
$73.37 MSRP: $109.21
You Save: $35.84 (33%)
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Passenger Side
- Replaces: 15233601
- Item Weight: 0.90 Pounds
- Item Dimensions: 4.2 x 4.2 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15773793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2008 Chevrolet Impala Door Handle

With a comprehensive array of OEM 2008 Chevrolet Impala Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Impala Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Impala Door Handle Parts Questions & Experts Answers

Q: How to replace the rear side door handle on 2008 Chevrolet Impala?
A: The process to replace the rear side door outside handle starts with removing the rear door trim panel alongside the rear door water deflector followed by opening the window to its uppermost position. Masking tape should be applied to the outside handle area to shield the paint from damage. Open the outside handle rod to lock clip that exists on the Door Lock before taking out the rear Door Lock. After removing the outside Door Handle bolt access tape you need to take out the three bolts from the rear Door Handle which must be followed by inserting the outside handle bolt through the latch hole. Remove the outside handle and the rod fittings from the door. Install the outside Door Handle and rod on the door before inserting the outside handle bolt through the latch hole then tighten it to 10 n.m (89 lb in). Once the rear Door Handle receives its three bolts and each one is secured to 10 n.m (89 lb in) torque measurement, employees move on to installing the rear Door Lock and outside Door Handle bolt access tape. Complete the outside Door Handle rod installation by putting it into the clip before closing the clip cover. First verify correct operation of the outside Door Handle then take off the masking tape before putting on the rear door water deflector and the rear door trim panel.