How to replace the rear Motor and Transmission Mount on 2009 Cadillac DTS?

Vehicle technicians should start transmission rear mount replacement by supporting and elevating the vehicle. Support the engine assembly with an appropriate jack system. The nuts fastening the transmission mount to the transmission mount bracket need to be removed. A gentle rise of the jack will free up the engine assembly so it can separate from the engine frame. Start by removing the bolts that fasten the mount to the frame followed by the single nut that mounts the frame then take off the mount entirely. Suspend the mount before you start installation steps. Each mount attaching bolt and nut needs to be securely fastened to the frame using a torque of 50 Nm (37 lb ft). Position the transmission and bolt in the mount and mount bracket while tightening the mount nut to 50 Nm (37 lb ft). Finish by removing the engine assembly support jack before lowering the vehicle to the ground.

OEM 2009 Cadillac DTS Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Motor And Transmission Mounts found

View related parts
2009 Cadillac DTS Rear Mount Part Number: 20760907
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Position: Rear
- Replaces: 15817836
- Item Weight: 4.60 Pounds
- Item Dimensions: 8.1 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20760907
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac DTS Front Mount Part Number: 20760905
$138.73 MSRP: $218.28
You Save: $79.55 (37%)
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Position: Front
- Item Weight: 9.50 Pounds
- Item Dimensions: 17.7 x 9.6 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20760905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac DTS Transmission Mount Part Number: 20760909
$95.83 MSRP: $150.09
You Save: $54.26 (37%)
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount
- Replaces: 25886567, 15294486
- Item Weight: 3.80 Pounds
- Item Dimensions: 9.3 x 6.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20760909
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2009 Cadillac DTS Motor And Transmission Mount

With a comprehensive array of OEM 2009 Cadillac DTS Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac DTS Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac DTS Motor And Transmission Mount Parts and Q&A

Q: How to replace the rear Motor and Transmission Mount on 2009 Cadillac DTS?
A: Vehicle technicians should start transmission rear mount replacement by supporting and elevating the vehicle. Support the engine assembly with an appropriate jack system. The nuts fastening the transmission mount to the transmission mount bracket need to be removed. A gentle rise of the jack will free up the engine assembly so it can separate from the engine frame. Start by removing the bolts that fasten the mount to the frame followed by the single nut that mounts the frame then take off the mount entirely. Suspend the mount before you start installation steps. Each mount attaching bolt and nut needs to be securely fastened to the frame using a torque of 50 Nm (37 lb ft). Position the transmission and bolt in the mount and mount bracket while tightening the mount nut to 50 Nm (37 lb ft). Finish by removing the engine assembly support jack before lowering the vehicle to the ground.