How to replace the engine mount on 2009 Chevrolet Cobalt?

The first step to replace the Engine Mount requires air cleaner assembly removal. A wood block alongside the Oil Pan should be your first step because you need to use a hydraulic floor jack to support the engine. You need to remove the Engine Mount to bracket bolts and Engine Mount to side rail nuts before pulling out the Engine Mount from the engine compartment. Instal the Engine Mount onto the side rail studs by putting on the Engine Mount to side rail nuts before you tighten them to 100 nm (74 lb ft) in the specified sequence. The installation of Engine Mount to bracket bolts requires manual starting actions that avoid using force on the Engine Mount to achieve hole alignment. Use specified sequence to install the Engine Mount to bracket bolts while tightening them to 50 nm (37 lb ft). The Oil Pan maintenance sequence ends with permanently attaching the air cleaner assembly.

OEM 2009 Chevrolet Cobalt Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Engine Mounts found

View related parts
2009 Chevrolet Cobalt Mounting Bracket
Part Number: 15854396
$81.92 MSRP: $128.33
You Save: $46.41 (37%)
Product Specifications
- Other Name: Adapter, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Bracket; Front Mount Bracket; Adapter; Bracket, Engine Mounting
- Replaces: 22689529
- Item Weight: 1.80 Pounds
- Item Dimensions: 10.2 x 5.7 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15854396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Front Mount
Part Number: 25974059
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting
- Replaces: 15835311, 15939383, 15256691, 25827846
- Item Weight: 4.20 Pounds
- Item Dimensions: 6.2 x 6.2 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25974059
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Front Mount, Yellow
Part Number: 25974058
Product Specifications
- Other Name: Mount Assembly-Engine *Yellow; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Replaces: 15939382, 25827845, 15256690, 15835310
- Item Weight: 4.50 Pounds
- Item Dimensions: 10.9 x 6.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25974058
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Front Mount
Part Number: 25974060
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Replaces: 25877466
- Item Weight: 4.20 Pounds
- Item Dimensions: 6.1 x 6.1 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25974060
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS

2009 Chevrolet Cobalt Engine Mount

With a comprehensive array of OEM 2009 Chevrolet Cobalt Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Cobalt Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the engine mount on 2009 Chevrolet Cobalt?
A: The first step to replace the Engine Mount requires air cleaner assembly removal. A wood block alongside the Oil Pan should be your first step because you need to use a hydraulic floor jack to support the engine. You need to remove the Engine Mount to bracket bolts and Engine Mount to side rail nuts before pulling out the Engine Mount from the engine compartment. Instal the Engine Mount onto the side rail studs by putting on the Engine Mount to side rail nuts before you tighten them to 100 nm (74 lb ft) in the specified sequence. The installation of Engine Mount to bracket bolts requires manual starting actions that avoid using force on the Engine Mount to achieve hole alignment. Use specified sequence to install the Engine Mount to bracket bolts while tightening them to 50 nm (37 lb ft). The Oil Pan maintenance sequence ends with permanently attaching the air cleaner assembly.