Make sure this part fits

GM 25974058
Front Mount, Yellow

2002-2011 GM

Customer Questions & Expert Answers (23)
GM 25974058 Front Mount, Yellow
GM 25974058 Front Mount, Yellow
  • Part Description
    Mount Assembly-Engine *Yellow; Engine Mount Bracket; Motor Mount
  • Replaces
    15939382, 25827845, 15256690, 15835310
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25974058
    Part DescriptionMount Assembly-Engine *Yellow; Engine Mount Bracket; Motor Mount
    Other NamesMount; Mount, Engine Mounting
    Item Dimensions10.9 x 6.3 x 6.3 inches
    Item Weight4.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15939382, 25827845, 15256690, 15835310
    ManufacturerGeneral Motors
    SKU25974058
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS, SS Panel4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2003-2007 Saturn Ion1, 2, 3, Red Line4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2002-2007 Saturn VueBase, Green Line4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25974058 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25974058 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the engine control module harness connectors for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Connect the engine control module harness connectors (3, 4).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What are the torque specifications for the engine mount installation for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Tighten the engine mount to body nuts to 66 N.m (49 lb ft) and the engine mount to bracket bolts to 130 N.m (96 lb ft) plus 45 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for tightening the engine mount to bracket bolts for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    50 Nm (37 lb ft) in the same sequence.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after hand starting the rear transaxle mount through bolt for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Allow the front and rear transmission mounts to settle with the through bolts loosened.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What bolts and nuts need to be removed to take out the engine mount for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the engine mount to bracket bolts and the engine mount to side rail nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What bolts need to be removed to take out the transmission mount for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the transmission mount-to-transmission bracket bolts and the transmission mount to mid-rail bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What bolts need to be removed to take out the transmission mount for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the transmission mount-to-transmission bracket bolts and the transmission mount to mid-rail bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the engine mount for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    First, remove the air cleaner assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for the rear transaxle mount to frame bolts for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Tighten the rear transaxle mount to frame bolts to 60 Nm (44 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done with the rear transaxle mount heat shield for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Rotate the rear transaxle mount heat shield clockwise until the tab is seated on the mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be ensured when installing the new front transaxle mount for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Ensure the transaxle bolts are torqued in the mandatory sequence, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How should the engine be supported during the replacement for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Support the engine with a hydraulic floor jack, using a piece of wood between the floor jack and the oil pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the powertrain assembly be supported for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Position two floor jacks with wood blocks under the engine and transaxle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step after replacing the engine mount for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Remove the hydraulic floor jack from under the oil pan and reinstall the air cleaner assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be ensured when installing the new front transaxle mount for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Ensure the transaxle bolts are torqued in the mandatory sequence.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after raising the transmission for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Ensure the transmission mount to transmission bolts are hand started without prying.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after raising the 2010 Chevrolet HHR? Posted by Customer
    A:
    Loosen the front transaxle mount through bolt and the rear transaxle mount through bolt, then lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is important to remember when installing the engine mount to bracket bolts for the 2010 Chevrolet HHR? Posted by Customer
    A:
    The engine mount to bracket bolts must be hand started without prying the engine mount to align the holes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the engine mount for the 2008 Chevrolet HHR? Posted by Customer
    A:
    First, remove the air cleaner assembly and the windshield washer solvent reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step after completing the installation for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the torque specification for the engine mount to side rail nuts for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Tighten them to 100 Nm (74 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What are the torque specifications for the engine mount to bracket bolts for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Tighten the engine mount to bracket bolts to 130 Nm (96 ft. lbs.) plus 45 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25974058, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25974058 Front Mount, Yellow. It is sometimes referred to as GM Engine Mount, GM Motor And Transmission Mount. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25974058 Front Mount, Yellow. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery