How to replace the engine mount on Chevrolet HHR?

The air cleaner assembly and windshield washer solvent reservoir need to be removed before starting the Engine Mount replacement. A hydraulic floor jack with wood should support the engine at the Oil Pan while you remove the mount. Unfasten the Engine Mount brackets from the bolts while also removing the nuts from the side rail studs until you can successfully pull out the Engine Mount from the compartment. Mount the engine component to steel rail studs while installing the side rail nuts before torquing them to 100 n.m (74 lb ft). The Engine Mount to bracket bolts require hand-tightening without using the Engine Mount to shift its position into hole alignment. Tighten Engine Mount to bracket bolts starting from the middle and proceeding to the rear and front with a torque of 50 n.m (37 lb ft). The installation process continues with hydraulic floor jack removal from under the Oil Pan followed by proper reinstallation of the windshield washer solvent reservoir along with the air cleaner assembly.

OEM Chevrolet HHR Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Engine Mounts found

View related parts
Chevrolet HHR Front Mount
Part Number: 25974059
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting
- Replaces: 15835311, 15939383, 15256691, 25827846
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Front Mount, Yellow
Part Number: 25974058
Product Specifications
- Other Name: Mount Assembly-Engine *Yellow; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Replaces: 15939382, 25827845, 15256690, 15835310
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Mounting Bracket
Part Number: 15854396
$81.92 MSRP: $128.33
You Save: $46.41 (37%)
Product Specifications
- Other Name: Adapter, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Bracket; Front Mount Bracket; Adapter; Bracket, Engine Mounting
- Replaces: 22689529
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Front Mount
Part Number: 25974060
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Replaces: 25877466
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | SS, SS Panel | 4 Cyl 2.0 L GAS

Chevrolet HHR Engine Mount

Our website offers an extensive catalog of genuine Chevrolet HHR Engine Mount at unbeatable prices. Every OEM Chevrolet HHR Engine Mount comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet HHR Engine Mount Parts Questions & Experts Answers

Mounting Bracket
15854396
Q: How to replace the engine mount on Chevrolet HHR?
A: The air cleaner assembly and windshield washer solvent reservoir need to be removed before starting the Engine Mount replacement. A hydraulic floor jack with wood should support the engine at the Oil Pan while you remove the mount. Unfasten the Engine Mount brackets from the bolts while also removing the nuts from the side rail studs until you can successfully pull out the Engine Mount from the compartment. Mount the engine component to steel rail studs while installing the side rail nuts before torquing them to 100 n.m (74 lb ft). The Engine Mount to bracket bolts require hand-tightening without using the Engine Mount to shift its position into hole alignment. Tighten Engine Mount to bracket bolts starting from the middle and proceeding to the rear and front with a torque of 50 n.m (37 lb ft). The installation process continues with hydraulic floor jack removal from under the Oil Pan followed by proper reinstallation of the windshield washer solvent reservoir along with the air cleaner assembly.