How to replace the blower motor on 2009 Chevrolet Malibu?

To replace the blower motor, you should first remove the right closeout panel. Remove the blower motor wire harness connector, then carefully snip the case with a straight cut to prevent damage to the motor cup without snipping any deeper than necessary. One should use a utility knife to scrape out the blower motor right down to the narrow groove of the lower case after which one should remove the blower motor and its nuts before he/she extracts it from the blower motor cup. As for the installation, install a new blower motor into a blower motor cup while following fastener precautions. Then secure the blower motor nuts tightening them against 2.4 Nm (21 lb in) then attach the motor blower seal to the blower motor service-ring attach the blower motor. Then, attach the blower motor attachment ring equipped with screws that will be tightened to 1.5 Nm (13 lb in). Lastly, reconnect the blower motor's wire harness connector and attach the right closeout panel.

OEM 2009 Chevrolet Malibu Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
2009 Chevrolet Malibu Blower Motor, Green Line
Part Number: 15863480
$116.91 MSRP: $211.59
You Save: $94.68 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Air Conditioner Evaporator Blower; HVAC Blower Motor; Blower Assembly; Motor Kit, A/C Evaporator Blower; Motor Kit, Heater Blower Motor
- Replaces: 15929376, 22737136
- Item Weight: 3.70 Pounds
- Item Dimensions: 7.7 x 7.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15863480
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2009 Chevrolet Malibu Mount Plate
Part Number: 15844347
$40.38 MSRP: $75.84
You Save: $35.46 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Kit; Fan; Blower Kit, A/C Evaporator Blower; Blower Kit, Heater Blower Motor
- Replaces: 22737139
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.6 x 7.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15844347
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2009 Chevrolet Malibu Blower Motor

With a comprehensive array of OEM 2009 Chevrolet Malibu Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Malibu Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the blower motor on 2009 Chevrolet Malibu?
A: To replace the blower motor, you should first remove the right closeout panel. Remove the blower motor wire harness connector, then carefully snip the case with a straight cut to prevent damage to the motor cup without snipping any deeper than necessary. One should use a utility knife to scrape out the blower motor right down to the narrow groove of the lower case after which one should remove the blower motor and its nuts before he/she extracts it from the blower motor cup. As for the installation, install a new blower motor into a blower motor cup while following fastener precautions. Then secure the blower motor nuts tightening them against 2.4 Nm (21 lb in) then attach the motor blower seal to the blower motor service-ring attach the blower motor. Then, attach the blower motor attachment ring equipped with screws that will be tightened to 1.5 Nm (13 lb in). Lastly, reconnect the blower motor's wire harness connector and attach the right closeout panel.