How to replace a spark plug on 2009 Chevrolet Silverado 1500?

Remove appropriate Spark Plug wire boots by twisting the boot 1/2 turn and carefully pulling only on the boot or using a recommended tool for this operation. Use a suitable tool to turn the Spark Plug 1 or 2 times before cleaning the surrounding area with an air nozzle or brush. Each Spark Plug should be placed in its specific tray bearing the cylinder number when multiple plug removal is required. Check the Spark Plug washer deployment and measure its gap before tightening the plug as per engine mechanical specifications. Manual installation of the Spark Plug into the Cylinder Head should be performed with attention to fastener caution instructions. Thoroughly tighten the Spark Plug to 15 nm (11 lb ft). It is necessary to use gm pn 12345579 dielectric grease (or its Canadian equivalent 10953481) on old Spark Plug wire boots when reusing the same wires before putting on their corresponding plug wire boots.

OEM 2009 Chevrolet Silverado 1500 Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Spark Plugs found

View related parts
2009 Chevrolet Silverado 1500 Spark Plug
Part Number: 12681665
$8.85 MSRP: $15.80
You Save: $6.95 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spark Plug Assembly-Gasoline Engine Ignition; Spark Plug, Spark Ignition; Spark Plug,Glow
- Replaces: 25162555, 12607234, 25315018, 25162556, 19256067, 89017883
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.8 x 1.1 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12681665
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2009 Chevrolet Silverado 1500 Glow Plug
Part Number: 12639701
$25.20 MSRP: $45.00
You Save: $19.80 (44%)
ADD TO CART
Product Specifications
- Other Name: Glow Plug, Glow; Diesel Glow Plug; Glow Plug, Spark Ignition
- Replaces: 97364968
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.5 x 1.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 12639701
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, SS, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Chevrolet Silverado 1500 Spark Plug
Part Number: 12621258
Product Specifications
- Replaces: 12571164, 12563707, 12609877
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.9 x 3.7 x 1.1 inches
- Condition: New
- SKU: 12621258
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2009 Chevrolet Silverado 1500 Spark Plug

With a comprehensive array of OEM 2009 Chevrolet Silverado 1500 Spark Plug, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Silverado 1500 Spark Plug are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Silverado 1500 Spark Plug Parts Questions & Experts Answers

Q: How to replace a spark plug on 2009 Chevrolet Silverado 1500?
A: Remove appropriate Spark Plug wire boots by twisting the boot 1/2 turn and carefully pulling only on the boot or using a recommended tool for this operation. Use a suitable tool to turn the Spark Plug 1 or 2 times before cleaning the surrounding area with an air nozzle or brush. Each Spark Plug should be placed in its specific tray bearing the cylinder number when multiple plug removal is required. Check the Spark Plug washer deployment and measure its gap before tightening the plug as per engine mechanical specifications. Manual installation of the Spark Plug into the Cylinder Head should be performed with attention to fastener caution instructions. Thoroughly tighten the Spark Plug to 15 nm (11 lb ft). It is necessary to use gm pn 12345579 dielectric grease (or its Canadian equivalent 10953481) on old Spark Plug wire boots when reusing the same wires before putting on their corresponding plug wire boots.