How to replace the Spark Plug Wires on 2009 Chevrolet Silverado 1500?

In order to change the ignition cable, you is to observe the correct routing of the cables. Start by unplugging the ignition cable boot(s) (1, 2) from the Ignition Coil by twisting the boot 1/2 turn and pulling only on the boot or using a tool that is meant for this purpose. Next, unplug the boot(s) from the Spark Plug in this way too. Loosen the ignition cable separators and pull off the ignition cable(s). During the installation, apply dielectric grease gm pn 12345579 (Canadian PN 10953481) or suitable if reinstall the old cables. Never spin or turn an ignition cable, as the Spark Plug is very delicate, and turning the cables may damage the Spark Plug point or button. For six-cylinder engines with sequential ignition, gaps, and points used with the multiple spark distribution system, strictly insert the ignition cable on the outside with the terminal flush to the side. Then, put the ignition cable boot(s) on the Spark Plug and on the Ignition Coil the ignition cable boot(s) 1, 2. Lastly, check that the ignition cables are routed properly (1, 2, 3, 4, 5, 6) and corrected by firming the boot sideward to ensure a proper seat and re-installation of any loose boot and re-application of new dielectric grease in the boot if it was just installed or the boot installed or put on the Spark Plug.

OEM 2009 Chevrolet Silverado 1500 Spark Plug Wires

Spark Plug Ignition Wires

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Spark Plug Wires found

View related parts
2009 Chevrolet Silverado 1500 Wire Connector
Part Number: 12579355
$111.80 MSRP: $244.10
You Save: $132.30 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Assembly-Ignition Coil; Wire Harness; Plug Wire; Harness; Wire; Wire, Spark Plug Or Coil
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.2 x 4.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12579355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Chevrolet Silverado 1500 Camshaft Position Sensor
Part Number: 12731654
$97.79 MSRP: $211.68
You Save: $113.89 (54%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Set-Spark Plug; Cable Set; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 19351570, 19206447
- Condition: New
- SKU: 12731654
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Chevrolet Silverado 1500 Cable Set
Part Number: 19417613
$76.96 MSRP: $166.58
You Save: $89.62 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Set, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 19351597, 89060518
- Item Weight: 0.50 Pounds
- Item Dimensions: 9.8 x 6.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19417613
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- LS, WT | 6 Cyl 4.3 L GAS

2009 Chevrolet Silverado 1500 Spark Plug Wires

With a comprehensive array of OEM 2009 Chevrolet Silverado 1500 Spark Plug Wires, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Silverado 1500 Spark Plug Wires are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Silverado 1500 Parts Questions & Experts Answers

Q: How to replace the Spark Plug Wires on 2009 Chevrolet Silverado 1500?
A: In order to change the ignition cable, you is to observe the correct routing of the cables. Start by unplugging the ignition cable boot(s) (1, 2) from the Ignition Coil by twisting the boot 1/2 turn and pulling only on the boot or using a tool that is meant for this purpose. Next, unplug the boot(s) from the Spark Plug in this way too. Loosen the ignition cable separators and pull off the ignition cable(s). During the installation, apply dielectric grease gm pn 12345579 (Canadian PN 10953481) or suitable if reinstall the old cables. Never spin or turn an ignition cable, as the Spark Plug is very delicate, and turning the cables may damage the Spark Plug point or button. For six-cylinder engines with sequential ignition, gaps, and points used with the multiple spark distribution system, strictly insert the ignition cable on the outside with the terminal flush to the side. Then, put the ignition cable boot(s) on the Spark Plug and on the Ignition Coil the ignition cable boot(s) 1, 2. Lastly, check that the ignition cables are routed properly (1, 2, 3, 4, 5, 6) and corrected by firming the boot sideward to ensure a proper seat and re-installation of any loose boot and re-application of new dielectric grease in the boot if it was just installed or the boot installed or put on the Spark Plug.